Burkert Type 2037 - Manual (Page 5)

5
AuthorizedUse
2 auThOrizeD use
non-authorized use of the devices may be dangerous to
people, nearby equipment and the environment.
▶ The diaphragm valves of Types 2030, 2031, 2031 K, 2032, 2033
and 2037 are designed for the control of contaminated, ultra-pure
or sterile media, as well as for abrasive or aggressive media (also
with higher viscosity).
▶ The devices may be used only for media which do not attack
the body and seal materials (see type label). Information on the
resistance of materials to the media is available from your Bürkert
sales office or on the Internet at: www.burkert.com .
▶ During use observe the authorized data, the operating condi-
tions and conditions of use specified in the contract documents
and operating instructions. These are described in the chapter
“5 System Description” and “6 Technical Data”.
▶ The device may be used only in conjunction with third-party
devices and components recommended and authorized by
Bürkert.
▶ Correct transportation, correct storage and installation and
careful use and maintenance are essential for reliable and fault-
less operation.
▶ Use the device only as intended.
2.1 restrictions
If exporting the system/device, observe any existing restrictions.
2.1.1 explosion protection approval
The explosion protection approval is only valid if you use the
modules and components authorized by Bürkert, as described in
these operating instructions.
If you make unauthorized changes to the system, the modules or
components, the explosion protection approval will also be terminated.
english
Type 2030, 2031, 2031 K, 2032,
2033, 2037