Xoro HSD 4000 - Manual (Page 99)

Connecting to AV amplifier with 5.1 channel input connector
CONNECTIONS
This player contains a Dolby Digital or MPEG2 decoder. This enables the playback of DVD recorded in
Dolby Digital, MPEG1/2 audio or linear PCM without an external decoder supports. When the player is
connected to an AV amplifier with 5.1 channel input connectors, theater quality audio could be enjoyed
at your home at the time of playing disc recorded in Dolby digital, MPEG1/2 audio or linear PCM.
Recommendation:
Choose below speaker size setting in the setting “Audio” menu: Front/Centre/Rear:
Large, Subwoofer: ON, or, Front/Centre/Rear: Small, Subwoofer: ON.
DVD player
Notes:
ll Choose right “audio” settings for this player according to your audio system requirement after
connection is made
l If the type of the speaker connected does not satisfy the channels recorded in an MPEG 2 or
Linear PCM disc, the disc will not be played in all channels but only in 2 channels(i.e., even if the
front speakers and the center speakers are connected, a disc recorded in 5.1 channels will be
played back only in 2 channels)
l DVDs recorded in Linear PCM/96kHZ sampling will
99