Connections – Xoro HSD 4000 User Manual

Page 100

Connecting to an external decoder or a power amplifier

CONNECTIONS

When DVD discs recorded in DOLBY digital, MPEG audio or other formats are played, corresponding
bit stream is output from the player’s OPTICAL and COAXIAL digital audio output connector. When
the player is connected to an external decoder or a power amplifier, you can enjoy theater-quality at
your home.

Concerning the audio output setting for the unit’s coaxial digital audio output connector

Notes when connecting the optical digital cable:
Remove the protective cap from the connector, insert the plug-ins of DVD and amplifier optical slot
so that the configurations of both the cable and the connector match. Keep the protective cap and
always reattach the cap when not using the connector to protect against dust and laser beam.

Notes:

Please set the digital output as RAW

Caution for the coaxial digital audio output connector: do not connect an amplifier with a Coaxial or
optical digital input connector) which does not contain the Dolby digital or MPEG audio decoder
otherwise it may be harmful to your ears and damage your speakers

Sound having 96 KHZ sampling is converted to 48 KHZ sampling when it is output from the coaxial digital audio
output connector

Disc

Sound recording format

Digital output setting

Dolby digital

PCM (44.1KHz sampling)

Raw

OFF

DTS

Linear PCM

Other

Linear PCM

DVD

100