Xoro HSD 4000 - Manual (Page 104)

OPERATION
Operation for DVD features
CLR
When setting a program or searching, you need to input a number. Press CLR button to clear the
number when the input number is incorrect.
ANGLE/AUDIO
Press ANGLE continuously during playback of DVD disc to toggle the disc between available
angles recorded on the disc if the disc has multi -angle function. Press AUDIO button during
playback to toggle between available audio languages recorded on the disc if the disc has this
multi -language function.
Note:
l
Press AUDIO button could toggle available audio language soundtracks.
PROG
Press STOP button first then press PROG button, the program playback screen appears on the
TV set. tracks or chapters can be programmed. Use NUMBER button to input your preferred track
(CD) or chapter (DVD) when the blue cursor flashes on the position 1.
Note: When programming a DVD disc, you must input title number ahead of “:” and chapter
number after it. It is invalid to input the number larger than available. Then press direction button
(UP, DOWN, LEFT, RIGHT) down to remove blue cursor to position 2 and the same procedure to
program your preferred track or chapter.
Use CLR button and enter a new number to amend false or unsatisfied program through direction
button. After you have selected all your preferred title/chapter(s) or track(s), Remove the cursor to
“Play Program” and press “enter” button or just press PLAY button to start program play. If the
cursor is removed to CLEAR ALL then press enter button to clear all your entered numbers so as
to reenter. After desired numbers have been entered, move the cursor to Play Program and press
enter to start the program playback.
You can quit program setting by pressing ‘PRGRAM’ button again and PLAY again to start normal
playback.
Notes:
l
Some discs have no program function.
l No Search function during programming playing
104