Xoro HSD 4000 - Manual (Page 102)

OPERATION
Operation for DVD features
F.FWD/F.RW D
Press F.FWD/F.RWD button on the remote control during playback and the unit will enter fast
forward/reverse status There are 5 speeds of fast forward (reverse) available: x2, x4, x8, x16 and
x 32. To return to normal play, press PLAY button on player or remote control again.
Notes:
l
Some discs have no such function
l For MPEG4 discs, the speed levels of fast forward (reverse) will only have x2, x4, x8.
SLOWF/SLOWR
Press SLOWF/SLOWR button on the remote control during playback and the unit will enter slow
forward/reverse status. There are 4 speeds available: 1/2, 1/4, 1/6 and 1/7. To return to normal
play, press PLAY button on player or remote control again.
Note:
l
Some discs have no such function
PAUSE/STEP
Press PAUSE/STEP button during play, the player will enter the still picture mode. If the button is
pressed again, the disc is advanced by one frame (step). When the button is kept pressed,
consecutive frame advance works. To return to normal play, press PLAY button.
Note:
l
Some discs have not such function
NOTE:
During the playing of the introduction of a movie, PAUSE/STEP, F.FWD, F.RWD, SLOW,
SKIP- / SKIP+ may be ineffective.
IP
Press IP button, can switch the YUV & YP(b)P(r)
Number (0-9/+10 button)
Press Number (0-9/+10) button and enter button allows you to directly access any desired track
while a disc is playing.
PAL/NTSC
Press NTSC/PAL button and enter button allows you to directly set TV standard
MUTE
Press MUTE button during play, the player shows mute picture and there is no audio output
(silence), press again to cancel MUTE. And pressing VOL+ or VOL- also can cancel MUTE.
PBC
Press the PBC button, under the VCD state. If you choose ‘Off ’, you can choose the VCD opem, If
you choose ‘On’ that you can not choose VCD opem.
102