Xoro HSD 4000 - Manual (Page 110)

OPERATION FOR CARD READER
After switching to card reader working status, Card Reader will read cards as per following sequence:
CF I/II--> SD/SM/MMC/MS. If there is a CF card in CF slot, it won’t read SD/SM/MMC/MS. If there are
no cards, it will show NO CARD.
For playing control, pls refer to JPEG Photo CD /Mp3 playing
The cards can only be removed when the card reader is at non-working status and the cards’ indicator
must be off, otherwise the reader or the cards may be damaged, or data on the cards may be lost or
corrupted.
To remove cards, you should pull the card gently and horizontally out of the slot by your hand directly.
Reading Cards & Playing control
Removing Cards
Remark:
The supported range & capacity for the folders & files in the card
l This card reader can support 2 levels of folders in the card.
l The total folders number can be supported in the card is no more than 10. (Max 5 folders can be
supported under directory)
l Only support 100 files for each folder or support 100 files for each card with not any folder in it.
l A folder including different format files should not be supported.
l JPEG file larger than 1 MB may not be displayed normally.
l Do not insert different cards simultaneously.
110