Xoro HSD 4000 - Manual (Page 101)

OPERATION
Preparation before playing disc
Operation for DVD features
The option of display language catalog is preset to German. Please refer to Setup operation
Most of functions are operated by remote control. Either operation of remote control and front panel is
effected when their buttons indicate the same function
Preparation
l
Turn the TV on and select AV as the TV input
l Switch on the stereo system power if the player has been connected to stereo system.
This p layer will enter DVD working status after power on.
Pressing CARD/DVD button on the remote control can switch from Card reader status to DVD playing
status.
PLAY
l
Connect AC power cord to AC outlet (AC230V, 50Hz)
l Switch on the power, the displayed HELLO on the VFD indicates the normal power supply, then
the VFD changes to LOAD. (Note: The disc information appears after several seconds if there is a
disc after LOAD displayed otherwise appears NO DISC)
l Press OPEN/CLOSE button to open disc tray. OPEN will be indicated on the right upper of TV
screen
l Place a disc (8cm or 12cm) onto the tray. (For onesided disc, position it with printed title side facing
up. For two-sided disc, position side to be playback facing down)
l Press OPEN/CLOSE again to close disc tray.
l Press PLAY to playback disc. You may operate according to MENU indication after MENU shows
on screen then press ENTER button to playback. Some discs can play automatically after loaded.
l Switch off the power via pushing the power button again, BYE will be displayed on VFD before
shut down.
STOP
Press STOP button to stop playing. When playback is stopped, the unit records the point where
STOP was pressed (RESUME function). Press PLAY again, and play will resume from this point.
Press STOP button twice, RESUME function will be cancelled.
RESUME function is suitable for discs showing playing time during playback.
Note:
l
Some discs including MPEG4 discs have no such function.
POWER
When you press the buttons, the player will switch to Standby status. When pressed again, the
player is returned to normal working status.
Note:
l
should you not wish to use the player, please switch off the power by pressing the power button.
SKIP-/SKIP+
Press SKIP- /SKIP+ button on remote control during playback. A chapter (DVD) or a track (CD) is
skipped back or ahead correspondingly each time the button is pressed.
101