Standard features – Datamax-O'Neil Workstation series User Guide User Manual
Page 15

Overview | 2
7
Workstation Series User’s Guide
Standard Features
The thermal printer has the following standard features:
Table 1: Standard Features
Features
Descriptions
Max Print Speed
4 IPS / 102 mmps
Resolution
300 dpi / 11.8 dpmm
Memory
32MB Flash (4MB User Space) / 32MB DDR2 RAM
Printer Type
Direct Thermal
Media Supply
•
Roll-fed
•
Die-cut
•
Continuous Labels: (5” [127mm] roll max diameter on 1.0” and
1.5” [25.4mm and 38mm] core)
Double-sided Top-of-Form
Sensor
Fixed position for center-biased stock:
•
Label Gap
•
Reflective black mark on the bottom or the top of the form
Tear Bar
Bar for tearing off gapped or continuous media
Media Back Feed
Capable of backing up; max 0.5”
Control Panel
Two buttons
Reset Button
Inset on the rear of the unit
LEDs
Two LEDs: Green - Power On, Red - Error
Power Switch
Positioned on the rear of the unit
Chassis / Media Cover
Plastic construction with a clear window
Bar Codes
See Appendix A
Fonts
See Appendix A
Downloadable Font Types
•
True-Type Scalable
•
PCL Bitmap (300 dpi)
Graphics
Full support of PCL5e and GL/2 graphics capability.
(Support for various host-based file fomats [PCX, BMP] are not part of
the PCL5e standard but are supported and converted by standard
applications)
Industry Standard Printer
Language
HP PJL, HP PCL5e, HP GL/2 and HP XL, printer languages with auto-
language select and extensions for barcode capabilities. Bi-directional
communications capability is also supported.
Interfaces
•
USB 2.0 Device
•
LAN 10/100