Analog Way OPS300 User Manual

Page 69

Memorizing Frames

1. In the Input Selection section, click on the

[SOURCE]

button (

1 to

12) of the source

you wish to record as a frame.

2. Click on the Logos/Frames tab of the RCS

interface. Then click on the

[RECORD

FRAME]

button.

3. Click on the field next to the first free Frame

to select it.

4. Click on the

[ENTER]

button.

Working with Logos

It is possible to store up to 8 logos in the

OPS300

non volatile memory. Logos work in much the same way

as frames, and can be recorded from any of the

OPS300

’ 12 sources.

Logos have more attributes than frames. They can be sized, positionned, but also keyed via color cutout

selection or Luma Key.

Memorizing Logos

1. In the Input Selection section, click on the

source button (

1 to

12) of the source

you wish to record as a logo.

2. In the Logos/Frames tab, click on Record

Logo, then select an empty logo memory

slot (

1 to

8) to record your logo into.

3. Adjust position, size and keying attributes

for your logo.

4. Click Execute to record your logo into the

selected memory slot. The

OPS300

RCS

will display a progress bar while recording

the logo.

5. In the Input Selection section, click the

LOGO1 button, and select logo number (

1 to

8) you wish to use. Your logo will appear on the preview

screen above any existing layer on screen.

6. Click the

[TAKE]

button. Your logo will appear on the main display.