Analog Way OPS300 - Manual (Page 26)

MAIN OUTPUT:
ANALOG: 1x analog output for the main display device on female HD15
connector.
DIGITAL/ANALOG: 1x main output on female DVI-I connector
(simultaneous analog and digital).
VIDEO OUTPUT:
Video Output card provides SD or HDTV formats in various signals and
connectors from Composite Video to HD SDI. This output can be used to
record your show by outputting the same content as the Main output in Mixer
Mode, or a choice between output #1 or #2 in Matrix Mode (see also OPS300
Modes, p.4).
AUDIO SWITCHER:
Audio Stereo Switcher card features 12 inputs and 2 outputs. An additional
auxiliary input can be mixed with any other input. Master Volume and
individual input level can be adjusted. Each input and output offers balanced
or unbalanced connections. It should be noted that the management of the
audio output follows the selection of video layers. Two modes are available:
Top Follow or Breakaway. In Top Follow Mode, the audio follows the topmost
video layer (after having pressed [TAKE] ). In Breakaway Mode, it is the
selected audio layer input that is permanently diffused.
Main Outputs
24