Analog Way Saphyr User Manual

Page 68

8.3.9 Working with Mirror modes

3. Copy & H.pos Flip mode:

Output #2 will be exactly the same as output #1 except the fact that the selected

layer will have its H position flipped (standard Mirror mode).

OUTPUT #1

OUTPUT #2

NOTES:

• Remember to simplify the use of this feature, you need to manipulate Output #1. While in mirror mode,

Output #2 will follow.

• Every change on Output #2 will have an effect only on Output #2, but remember that if a change occurs on

Output #1 after that, Output #2 will update automatically to match output 1.

• Remember that the layer B is always displayed with the keying feature enabled.