Analog Way Saphyr - Manual (Page 30)

30
7.2.2 Audio
Matrix mode
This mode turns your Saphyr into a true 10 x 2 scaled matrix, while preserving seamless switching capabilities.
Program 1 and Program 2 outputs can be set to different resolutions and rates. Switching between any of the
inputs can be done with the various effects (Cut, Fade, Slides…) and synchronized on both outputs.
In this section, you will setup the audio of your device, you have several modes. In all modes, you have the
possibility to output the audio in AES3 or SPDIF:
NO AUDIO: the audio of your device is switched off
PRESET MODE: the standard mode of use of the device
You have two possibilities:
• Top layer: the sound on the output will follow the audio input of the top
layer.
• Breakaway: when breakaway is activated, the audio on the output is
memorized into the preset. A change of preset, changes the audio on the
output. A change of content into a video layer has no effect on the audio.
ROUTING MODE: in this configuration, simply choose an audio input to
assign it to the output. The audio configuration remains the same during
the show.
In this example input1 is on out1 and input 2 is on out 2
7.2.2 Audio
In the screen configuration, you will find the state of your screen. It indicates the screen resolution, the
maximum number of layers you can use.
You will find configuration for the Quick Frame and the background color too.
The Quick Frame will be your emergency frame that can be displayed in front of
every layer. Here, select the frame slot number to be displayed as the Quick Frame.
If you are in Matrix mode, you have 2 screens status.
7.2.3 Screens