CEMB USA C71_2 evo (D) - Manual (Page 7)

I 0637 - 7 GB
4.2.2 - OPPOSITE POSITION
The normal balancing condition requires the correction weights to be applied at the top (12 o’clock) when the symbol
is displayed:
►
Apply the correction weight at the top (12 o’clock)
If "OPPOSITE POSITION" is enabled, the phase displays also indicate the weight application position at the bottom
(6 o’clock) to facilitate cleaning the rim and the relative application of adhesive weights. The symbol used is:
Apply the correction weight at the bottom (6 o’clock)
For the unbalance SPLIT function, see the relative paragraph.
4.2.3 - ET
Enabling the ET function, after the end of the automatic distance and diameter measurement, the wheel balancer
suggests the most likely width value for the dimensions just acquired. The outside weight symbol is displayed in
orange to indicate that the user should check it. If necessary, change the width value by pressing the
buttons, otherwise proceed with normal balancing.
►