CEMB USA C71_2 evo (D) - Manual (Page 15)

I 0637 - 15
11
GB
To go to these functions:
Press or
set the nominal diameter to 1” or measure the actual diameter at
the application point
measure the actual diameter at the application point
▪
▪
▪
- Setting:
N.B.: when dE is not set, dE = dI - 1” is automatic.
6.3.2.1 - ALUS variant with inside clamp weight
To go to these functions:
Press or
set the nominal diameter
measure the actual diameter at the application point
▪
▪
- Setting:
N.B.: when dE is not set, dE = dI - 2” is automatic.