5 - indications and use of the wheel balancer, 1 - initial screen – CEMB USA C65 (E) User Manual
Page 8
I 0206 - 8
2
GB
5 - INDICATIONS AND USE OF THE WHEEL BALANCER
The monitor shows several information and suggests various alternative ways of use to the operator.
This is through various “screens”.
5.1 - INITIAL SCREEN
Buttons enabled
: main functions screen (see
MENU ACCESS DIAGRAM
)
: type of correction (see
ALU AND STATIC MODES
)
: balancing spin (see
RESULT OF MEASUREMENT
)
Dimensions gauge: when extracted, the Dimensions screen is selected (see
PRESETTING OF WHEEL
DIMENSIONS
).
If the machine remains on the initial screen for a certain amount of time without being used, the system
is automatically switched to a screen-save. Striking of any key, movement of the wheel of distance +
diameter gauge will cause automatic switching from the screen-save menu to the initial screen.
5.1.2 SCREEN-SAVE SCREEN
N.B. Name of the wheel balancer’s owner. Can be preset via the monitor
(see Section
PRESETTING THE CUSTOMER AND USER NAME
)