J&M GC-31T Assembly - Manual (Page 45)

GC31
t
-1 G
rain
C
art
a
ssembly
-45-
STEP - 87
Install the wheels and tires with 3/4” lug nuts. Be sure to tighten and monitor lug nuts to make sure that
they stay tight.
STEP - 88
Install the jack and the black
manual holder. The manual holder
is to be attached on the auger side
of the pto guard. If there are not
holes there already, drill as needed.
Use the manual holder to mark
your holes. Drill through holes
for an M6 bolt. Attach the manual
holder with (2) M6 hex head bolts,
(2) M6 washers and (2) M6 hex
head nuts.