J&M GC-31T Assembly - Manual (Page 41)

GC31
t
-1 G
rain
C
art
a
ssembly
-41-
STEP - 80
STEP - 79
Install the adjustable auger rest pad. Use (4) M10 x 25 MM serrated hex head bolts and (2) M10 serrated
hex flange nuts. Next attach the adjustable auger rest. Use (2) M10 x 40 MM, (2) M10 washers, and (2)
M10 nylon lock nuts. Do not tighten the bolts. This will need to be adjusted in the next step.
Install the Sideboard Brace. Use
(12) M10 serrated hex head bolts
and (12) serrated hex nuts to attach
the sideboard brace gussets. To in-
stall the brace use (4) M12 serrated
hex head bolts and (4) serrated Hex
nuts.
Adjustable Auger
Rest Pad
Adjustable Auger
Rest