J&M GC-31T Assembly - Manual (Page 43)

GC31
t
-1 G
rain
C
art
a
ssembly
STEP - 84
STEP - 83
-43-
Use an overhead hoist and lift strap to install the flow control spout assembly. Use (2) M12 x 50MM bolts
and hex locknuts. Do not overtighten. The flow control spout assembly needs to be able to pivot freely.
Install the hydraulic hose holder tank
bracket. Use (2) M10 x 25MM ser-
rated hex head bolts and (2) M10
serrated hex flange nuts to attach the
hose holder to the tank assembly.
Next loosely attach the hydraulic hose
holder ladder bracket. Use (2) M10 x
40MM hex head bolts and (2) M10
nylon lock nuts. The hydraulic hoses
will run between the bracket and the
ladder.
M12 x 50 MM
bolt goes on the
top and bottom of
the flow control
spout