J&M GC-31T Assembly - Manual (Page 22)

GC31
t
-1 G
rain
C
art
a
ssembly
-22-
STEP - 42
STOP! Tighten the bolts that are surrounded by the outlined area in the above figure.
these bolts will be inaccessible after the next few steps.
STEP - 41
Attach the junction box and display
screen mounts. Use (4)M10 x 25 MM
bolts to mount them both. Attach the
battery box walls with (2) M10 x 25
serrated hex head bolts and (2) M10 ny-
lon locking Nuts. Next attach the battery
box strap with (2) M10 x 50MM hex bolts
and (2) nylon insert locknuts. Now At-
tach the scale monitor bracket with (2) M6
x 20MM hex head bolts and (2) M6 nylon
locking nuts. Next attach the scale monitor us-
ing (2) M6 x 20MM hex head bolts and (2) M6
nylon locking nuts. Finish the battery box with
attaching the cord wrap with (2) M10 x 25MM
serrated hex head bolts and (2) M10 locking nuts.
Next attach the junction box to the junction box
mount using (4) M5 x 20 hex head bolts and (4)
M5 locking nuts.