Neff T66S66N0 - Manual (Page 8)

Power levels
Turn the corresponding control clockwise to the 0
setting. Switching off a burner
If your hob features the automatic ON function
(ignition sparkers):
1. Press the chosen burner control and turn it
anticlockwise to the maximum power setting.
While the control is still pressed down, sparks are
produced on all burners. The flame ignites (it is no
longer necessary to press down the control).
2. Turn the control to the required setting.
If it does not come on, turn the control to the off
setting and repeat the steps above. This time,
press and hold the control for longer (up to 10
seconds).
Warning! If after 15 seconds have elapsed, the
flame does not ignite, switch off the burner and
open a nearby window or door. Wait at least one
minute before trying to switch the burner back on.
Switching on
automatically
The progressive controls can be used to control
the power needed, from minimum to maximum
power.
Safety system
Ignition
sparker
Setting
Large flame
Economy
flame
Control off
Maximum capacity or
aperture and electricity
on
Minimum capacity or
aperture
7
Thermocouple
Depending on the model, your hob may have a
lighting the flame.
press and hold it down firmly for 4 seconds after
safety system (thermocopuple) that prevents the
burner as usual and, without releasing the control,
To ensure that this device is active, switch on the
flow of gas if the burners accidentally switch off.