MoTeC Snowmobile Plug-In ECU - Manual (Page 7)

MoTeC Quick Start Guide iii
Quick Start Guide
Throughout this manual we use the following icons to indicate information
only valid for a particular Snowmobile:
Yamaha
Ski-Doo
Installation
The Snowmobile Plug-In ECUs are supplied as a complete replacement kit
including a Base Map to provide a tune for the vehicle that will result in
direct power gain.
WARNING:
Your dealer must ensure that your M400 Marine ECU has the
correct firmware loaded (currently V3.53C or later) and that a
suitable configuration file (Base Map) is loaded, before you fit
the kit to your Snowmobile.
Failure to do this may result in a Snowmobile which may not
power up, may not start, or may permanently damage the
ignition coils.
Detailed installation instructions can be found in the section relevant for
your Snowmobile.
You should read:
• Yamaha Apex Installation .................................................................... 3
• Ski-Doo
2009-Current Installation ........................................................ 7
Data Logging
To take full advantage of the possibilities of the system, data logging can
provide you with valuable knowledge about the performance and reliability
of the engine and vehicle.
Note: The Snowmobile Plug-In ECU systems provide data logging for a
free evaluation period of the first 8 hours engine running time. After this
evaluation period data logging is available as an Upgrade.
This manual will explain how to obtain the logged data from your
Snowmobile.