DE-STA-CO PN500 User Manual
Page 7
5
SECTION 2: Overview
The sketches contained in this document are for illustrative purposes only. They are not intended to
accurately represent the components and therefore are not to scale. The various models may be
different than shown, depending upon options chosen or the particular configuration of a unit.
2.1.
ED200 Series (only) Location Map
FIGURE 1
Center of dwell
position shown
ED200 Series Parts List
1.
Housing
2.
Cam
3.
Cam shaft
4.
Cam shaft key
5.
Locknut & washer
6.
Tapered roller bearing
7.
Shim set
8.
Bearing cap
9.
Oil seal
10.
Bearing cap (reducer side)
11.
Bearing retainer & seal cap
12.
Oil seal (reducer side)
13.
Eccentric center tube
14.
Thrust bearing
15.
Roller gear shaft
16.
Tapered roller bearing
17.
Locknut and washer
18.
Oil seal
19.
Oil seal
20.
Cam followers
21.
Cone point set screws
22.
Locknut and washer
23.
Pipe plug
24.
Oil site glass
25.
Oil sump vent
26.
Bushing
27.
Cap screws
28.
Cap screws