0x3b read the list operation (cc/cv/cw/cr), 0x3c set how lists repeat (once or repeat), 0x3d read how lists repeat (once or repeat) – B&K Precision 8500-8526 - Manual User Manual
Page 62: 0x3e set the number of list steps, 0x3f read the number of list steps
Byte
offset
Meaning
3 is constant resistance (CR)
4-24
Reserved
0x3B Read the list operation (CC/CV/CW/CR)
Byte
offset
Meaning
3
List operation mode:
0 is constant current (CC)
1 is constant voltage (CV)
2 is constant power (CW)
3 is constant resistance (CR)
4-24
Reserved
0x3C Set how lists repeat (ONCE or REPEAT)
Byte
offset
Meaning
3
How lists repeat:
0 is ONCE
1 is REPEAT
4-24
Reserved
0x3D Read how lists repeat (ONCE or REPEAT)
Byte
offset
Meaning
3
How lists repeat:
0 is ONCE
1 is REPEAT
4-24
Reserved
0x3E Set the number of list steps
Byte
offset
Meaning
3 to 4
2 byte little-endian integer for number of steps
5-24
Reserved
0x3F Read the number of list steps
Byte
offset
Meaning
3 to 4
2 byte little-endian integer for number of steps
5-24
Reserved
8500 DC Load Series
Version: 030614
Page 62 of 77