B&K Precision 830C - Manual - Manual (Page 62)

60
Tolerance
The tolerance mode feature is specifically used for
component sorting purposes. Users who need to test
and sort through a large number of components will
find this function quite helpful.
Tolerance Range
The tolerance function is configured primarily by
percentage range, meaning a percentage is used to
define whether a measured value is within tolerance
or out of tolerance.
Selectable tolerance range is: 1%, 5%, 10%, and
20%.
Setup Tolerance
1. Insert the component to be used as the
“standard” reference value. In other words,
insert a known “good” component that will be
used for testing against all other components.
(See Figure 21 for illustration)
Note: The tolerance mode cannot be
activated unless the meter senses that a