B&K Precision 393 - Manual - Manual (Page 21)

21
2.11 Auto Power Off
Auto power off occurs approximately after 30 minutes when
there has been no interaction with the meters knobs or
buttons. If an auto power off event occurs, change the position
of the rotary knob to turn the meter back on again. To disable
the auto power off feature, press and hold the MAX/MIN
button while rotating the rotary switch from off to any position.
When the auto power off feature is disabled, the LCD will no
longer display the APO annunciator on the left side of the
display.
3 PC Communication
The 393 digital multimeter comes with application software,
which provides most of the controls that emulate the front
panel of the instrument.
The software is included on the supplied CD or can be
downloaded at www.bkprecision.com.
Remote communication is supported using the software only.
Remote commands are not available.
20 A uAmA
COM V.Ω
% Duty Cycle