B&K Precision 393 - Manual - Manual (Page 17)

17
2.5 Make Diode Measurements
Turn the rotary switch to the corresponding symbol for the
measurement you would like to perform. Press the shift button
to cycle to the diode function.
CAUTION:
Always connect the test leads to the instrument
inputs first before connecting the DUT to avoid
potential shock hazard.
Follow these steps to make a measurement.
1. Connect the black test lead to the COM input.
2. Connect the red test lead to the VΩHz%ns input.
3. Probe with the test leads to the DUT and take the
measured reading on display.
Figure 3 - Connection for Diode Measurement
WARNING:
Do not apply more than 1000 V DC across the
terminals or they will be damaged.
2.6 Continuity Test
Turn the rotary switch to the corresponding symbol for the
measurement you would like to perform. Press the shift button
to display the continuity icon
.
20 A
uAmA
COM V.Ω
Diode