Atec Tektronix-AWG7000 Series - Manual (Page 9)

Arbitrary Waveform Generator — AWG7102 • AWG7101 • AWG7052 • AWG7051
Auxiliary Outputs
Characteristic AWG7102 AWG7101 AWG7052 AWG7051
Marker Output
Number of outputs 4 (2 per channel) 2 4 (2 per channel) 2
Output style Differential
Output impedance 50 Ω
Connector SMA Front
Level (into 50 Ω) (Twice for Hi_Z Input)
Output window -1.4 V to +1.4 V
Amplitude 0.5 V
p-p
to 1.4 V
p-p
Resolution 10 mV
External termination -2.8 V to +2.8 V
Level accuracy ±(10% of setting + 50 mV)
Rise/Fall time (20% to 80%) 45 ps (1.0 V
p-p
, Hi +1.0 V, Lo 0 V)
Marker Timing Skew
Intra Skew <13 ps (between each channel (+) Pos and (–) Neg output) (typical)
In same channel <30 ps (between Marker 1 and Marker 2 output) (typical)
Delay Control Between Markers
Range 0 to 300 ps
Resolution 1 ps
Accuracy ±(5% of setting + 50 ps)
Random Jitter (typical) 1010 clock pattern
RMS 1 ps 1 ps
Total Jitter (typical) 2 15 -1 PN data pattern (at 10-12 BER)
Peak-to-Peak 30 ps
p-p
30 ps
p-p
10 MHz Reference Out
Amplitude 1.2 V
p-p
into 50 Ω. Max 2.5 V
p-p
open
Impedance 50 Ω, AC coupling
Connector BNC Rear
DC Outputs
Number of outputs 4: Independently controlled outputs
Range -3.0 to +5.0 V
Resolution 10 mV
Max. current ±30 mA
Connector 2×4 Pin Header on front panel
www.tektronix.com 9