Atec Tektronix-AWG7000 Series - Manual (Page 7)

Arbitrary Waveform Generator — AWG7102 • AWG7101 • AWG7052 • AWG7051
Option 02: High-bandwidth Output Option (Remove Standard Output)
Characteristic AWG7102 AWG7101 AWG7052 AWG7051
Output Style Differential
Output Impedance 50 Ω
Connector SMA Front
Amplitude (into 50 Ω)
Amplitude 500 mV
p-p
to 1.0 V
p-p
Resolution 1 mV
DC accuracy ±(2.0% of Amplitude + 2 mV)
Offset N/A
Pulse Response (-1 and 1 waveform data, 1 V
p-p
)
Rise/Fall Time: (20 to 80%) 45 ps
Overshoot Less than 3% (at 1.0 V
p-p
amplitude)
Bandwidth (-3 dB) (typical) 5.8 GHz
Timing Skew Less than 20 ps (between each channel (+) Pos and (–) Neg output)
Delay from Marker Output 0.2 ns
Sine Wave (up to 5th harmonic) (10 GS/s clock, 32 waveform points, 312.5 MHz signal
frequency, 1.0 V amplitude)
(5 GS/s clock, 32 waveform points, 156.25 MHz signal
frequency, 1.0 V amplitude)
Harmonic Distortion (typical) ≤ -42 dBc ≤ -45 dBc
Nonharmonic Spurious (typical) ≤ -50 dBc, DC to 5 GHz ≤ -50 dBc, DC to 2.5 GHz
SFDR (typical) (10 GS/s clock, Amplitude: 1 V
p-p
, 10 bit DAC operation mode,
DC to 5 GHz) 44 dB (at 312.5 MHz)
(5 GS/s clock, Amplitude: 1 V
p-p
, 10 bit DAC operation mode,
DC to 2.5 GHz) 48 dB (at 156 MHz)
Phase Noise (10 GS/s clock, Amplitude: 1 V
p-p
, 312.5 MHz)
≤ -90 dBc/Hz at 10 kHz offset
(5 GS/s clock, Amplitude: 1 V
p-p
, 156 MHz)
≤ -90 dBc/Hz at 10 kHz offset
Random Jitter (typical) 1010 clock pattern
RMS 0.9 ps 0.9 ps
Total Jitter (typical) 2 15 -1 PN data pattern (at 10-12 BER)
Peak-to-Peak 20 ps
p-p
: at 2 to 10 Gb/s 20 ps
p-p
: at 2 to 5 Gb/s
www.tektronix.com 7