Atec Tektronix-AWG7000 Series - Manual (Page 5)

Arbitrary Waveform Generator — AWG7102 • AWG7101 • AWG7052 • AWG7051
Characteristics
Arbitrary Waveforms
Characteristic AWG7102 AWG7101 AWG7052 AWG7051
Waveform Length 2 to 32,400,000 points (or 2
to 64,800,000 points, Option
01) in multiples of 64
Interleave:
2 to 64,800,000 points (or 2
to 129,600,000 points, Option
01) in multiples of 128
2 to 32,400,000 points (or 2 to 64,800,000 points, Option 01) in multiples of 64
Number of Waveforms 1 to 16,000
Sequence Length 1 to 4,000 steps
Sequence Repeat Counter 1 to 65,536 or infinite
Sequence Control Repeat count, Wait for Trigger, Go-to-N, and Jump
Jump Mode Synchronous and Asynchronous
Run Modes
Continuous Waveform is iteratively output. If a sequence is defined, the sequence order and repeat functions are applied
Triggered Waveform is output only once when an external, internal, GPIB, LAN, or manual trigger is received
Gated Waveform begins output when gate is true and resets to beginning when false
Sequence Waveform is output as defined by the sequence
Interleave operation Up to 20 GS/s sample rate
(Option 06)
N/A
Clock Generator
Sampling frequency 10 MS/s to 10 GS/s
(10 GS/s to 20 GS/s at interleave)
10 MS/s to 10 GS/s 10 MS/s to 5 GS/s
Resolution 8 digits
Internal Clock
Accuracy Within ±(1 ppm + Aging)
Aging: within ±1 ppm/year
Clock phase noise < -90 dBc/Hz at 100 kHz offset
Internal Trigger Generator
Internal Trigger Rate
Range 1.0 μs to 10.0 s
Resolution 3 digits, 0.1 μs minimum
Skew Control Between Outputs
Range -100 ps to +100 ps N/A -100 ps to +100 ps N/A
Resolution 1 ps N/A 1 ps N/A
Skew accuracy ±(10% of setting +10 ps) N/A ±(10% of setting +10 ps) N/A
www.tektronix.com 5