Atec Tektronix-AWG7000 Series - Manual (Page 10)

Data Sheet
Auxiliary Inputs
Characteristic AWG7102 AWG7101 AWG7052 AWG7051
Trigger/Gate In
Impedance 1 kΩ or 50 Ω
Polarity POS or NEG
Connector BNC Front
Input Voltage Range 1 kΩ: ±10 V
50 Ω: ±5 V
Threshold
Level -5.0 V to 5.0 V
Resolution 0.1 V
Trigger to output uncertainly
Asynchronies between
internal/external clock and
trigger timing (typical)
2.2 ns at 10 GS/s, 2.6 ns at 7 GS/s, 3.4 ns at 5 GS/s
Synchronize between external
clock and trigger timing
(typical)
10 GS/s
x1 clock divider: 8 clock + 50 ps
p-p
10 GS/s
x1 clock divider with specific timing: 50 ps
p-p
, 10 ps
RMS
The ambient temperature variant allows only ±5 ℃
Synchronize between external
10 MHz reference and trigger
timing (typical)
10 GS/s setting: 8 clock + 150 ps
p-p
10 GS/s setting with specific timing: 150 ps
p-p
, 30 ps
RMS
The ambient temperature variant allows only ±5 ℃
Trigger Mode
Minimum pulse width 20 ns
Trigger hold-off 832 × sampling_period - 100 ns
Delay to analog out 128 × sampling_period + 250 ns
Gated Mode
Minimum pulse width 1024 × sampling_period + 10 ns
Delay to analog out 640 × sampling_period + 260 ns
Event Input
Impedance 1 kΩ or 50 Ω
Polarity POS or NEG
Connector BNC Front
Input voltage range 1 kΩ: ±10 V
50 Ω: ±5 V
Threshold level -5.0 V to 5.0 V
Resolution 0.1 V
Sequence Mode
Minimum pulse width 20 ns
Event hold-off 900 × sampling_period + 150 ns
Delay to analog out 1024 × sampling_period + 280 ns (Jump timing: Asynchronous jump)
External Clock IN
Input voltage swing +5 to +11 dBm
Impedance 50 Ω, AC coupled
Frequency range 5 GHz to 10 GHz: (acceptable frequency drift is ±0.5%)
Clock divider 1/1, 1/2, 1/4……1/256 1/2, 1/4……1/256
Connector SMA Rear
Fixed Reference Clock IN
Input voltage range 0.2 V
p-p
to 3.0 V
p-p
Impedance 50 Ω, AC coupled
Frequency range 10 MHz, 20 MHz, 100 MHz (with ±0.1%)
Connector BNC Rear
Variable Reference Clock IN
Input ranges 5 MHz to 800 MHz (acceptable frequency drift is ±0.1%)
Input voltage range 0.2 V
p-p
to 3 V
p-p
Impedance 50 Ω, AC coupled
Multiplier rate 1 to 2000
(2 to 4000 at interleave)
1 to 2000 1 to 1000
Connector BNC Rear
10 www.tektronix.com