Atec Yokogawa-WT3000 - Manual (Page 20)

࡯ Precision Power Analyzer WT3000
࡯ Standard accessories
Power cord, Spare power fuse, Rubber feet, current input
protective cover, User’s manual, expanded user’s manual,
communication interface user’s manual, printer roll
paper(provided only with /B5), connector (provided only
with /DA) Safety terminal adapter 758931(provided two
adapters in a set times input element number)
Safety terminal adapter
758931
* requires 761922 software
Note: Adding input modules after initial product delivery will require rework at the factory.
Please choose your models and configurations carefully, and inquire with your sales
representative if you have any questions.
Model
760301 WT3000 1 input element model
WT3000 2 input elements model
WT3000 3 input elements model
WT3000 4 input elements model
for 760301 model
for 760302 model
for 760303 model
for 760304 model
Standard Version
Motor Version
UL/CSA standard
Advanced Computation
(IEC standard testing*, harmonic, FFT, Waveform computation)
Built-in Printer
Delta Calculation
Add-on Frequency Measurement
20ch D/A output
VGA Output
Serial (RS-232) Interface
USB port (PC)
USB port (Peripheral)
Ethernet function
Cycle by Cycle
Voltage Fluctuation, Flicker
-01
-02
-03
-04
for 760301 model -10
for 760302 model -20
for 760303 model -30
for 760304 model
30A input element
2A input element
-40
-SV
-MV
-D
VDE standard -F
AS standard -R
BS standard -Q
GB standard -H
NBR standard -N
/G6
/B5
/DT
/FQ
/DA
/V1
/C2 Select
one /C12
/C5
/C7
/CC
/FL
760302
760303
760304
Element number
Version
Power cord
Options
Suffix Codes Description
࡯ Accessory (sold separately)
࡯ Rack Mount
Due to the nature of this product, it is possible to touch its metal parts. Therefore, there is a risk of electric
shock, so the product must be used with caution.
* Use these products with low-voltage circuits (42V or less).
Model Product Description
Model Product Name Description
Model Suffix and codes Description Description
Model Suffix code Description
701960 Compact mount 500*560*705mm(W, D, H)
/A Key board and mouse table
701961 Deluxe mount 570*580*839mm(W, D, H)
/A Key board and mouse table
701962
751521
-10 Three-phase U, V
Single-phase DC to 100 kHz (-3 dB). -600 A to 0 A to +600 A (DC)
Basic accuracy:
Ϯ (0.05% of rdg* + 40 mA) Superior noise
withstanding ability and CMRR characteristic due to
optimized casing design Three-phase U, W
Three-phase U, V, W
100 V AC (50/60 Hz)
115 V AC(50/60 Hz)
230 V AC(50/60 Hz)
UL/CSA standard
VDE standard
AS standard
BS standard
GB standard -20
-30
-1
-3
-7
-D
-F
-R
-J
-H
751523
Supply voltage
Power cord
General-purpose mount 467*693*713mm(W, H, D)
Model/parts number Product Description Order Q’ty
751535-E4 Rack mounting kit For EIA
758917 Test read set A set of 0.8m long, red and black test leads 1
758922 Small alligator-clip Rated at 300V and used in a pair 1
758929 Large alligator-clip Rated at 1000V and used in a pair 1
758923 Safety terminal adapter (spring-hold type) Two adapters to a set. 1
758931 Safety terminal adapter (screw-fastened type) Two adapters to a
set. 1.5 mm hex Wrench is attached 1
758924 Conversion adapter BNC-banana-jack(female) adapter 1
366924 * BNC-BNC cable 1m 1
366925 * BNC-BNC cable 2m 1
701959 Safety mini-clip Hook type. Two in a set 1
758921 Fork terminal adapter Banana-fork adapter. Two adapters to a set 1
B9284LK External sensor cable Current sensor input connector. Length 0.5m 1
B9316FX Printer roll pager Thermal paper, 10 meters (1 roll) 10
751535-J4 Rack mounting kit For JIS
CT1000 AC/DC Current sensor DC~300 kHz, ± (0.05% of reading +30uA), 1000 Apk
CT200 AC/DC Current sensor DC~500 kHz, ± (0.05% of reading +30uA), 200 Apk
CT60 AC/DC Current sensor DC~800 kHz, ± (0.05% of reading +30uA), 60 Apk
751552 Clamp-on probe 30 Hz~5 kHz, 1400 Apeak(1000 Arms)
࡯ Mounts
࡯ Current Sensor Unit
* 751523-10 is designed for WT3000 and WT1800. 751523-20 is designed for the WT200 Series.
* 751521/751523 do not conform to CE Marking.
࡯ AC/DC Current sensor /Clamp on Probe
* CT series do not conform CE Marking.
* For detailed information, see Power Meter Accessory Catalog Bulletin CT1000-00E
Model Product
760122 WTViewer Software Data acquisition software 1
761922
Harmonic/Voltage fluctuation/Flicker
Measurement Software
Standard-compliant measurement 1
࡯ Application Software
Order Q’ty Description
* Cable B9284LK (light blue) for external current sensor input is
sold separately. Safety terminal adapter 758931 is included with
the WT3000. Other cables and adapters must be purchased by
the user.
Exterior
Model and Suffix Codes
unit : mm
32 13 426 13 32 427
20
177
Subject to change without notice.
[Ed : 06/b] Copyright ©2004
Printed in Japan, 309(KP)
YOKOGAWA METERS & INSTRUMENTS CORPORATION
Global Sales Dept.
/Phone: +81-42-534-1413 Facsimile: +81-42-534-1426
E-mail: [email protected]
YOKOGAWA CORPORATION OF AMERICA
Phone: (1)-770-253-7000, Fax: (1)-770-254-0928
YOKOGAWA EUROPE B.V. Phone: (31)-88-4641000, Fax: (31)-88-4641111
YOKOGAWA ENGINEERING ASIA PTE. LTD. Phone: (65)-62419933, Fax: (65)-62412606