Atec Rohde-Schwarz-FSW - Manual (Page 19)

Version 05.01, December 2012
Rohde & Schwarz R&S ® FSW Signal and Spectrum Analyzer 19
Video out
Bandwidth
equal to VBW setting
Output scaling log. display scale logarithmic
lin. display scale linear
Output level center frequency > 10 MHz, span = 0 Hz,
signal at reference level and center
frequency 1 V, open circuit (nom.)
IF wide output (with R&S ® FSW-B160 option only)
Connector BNC female, 50 Ω (nom.)
IF out
IF frequency
center frequency ≥ 200 MHz 50 MHz to 550 MHz (nom.)
Max. bandwidth (6 dB) YIG preselector off 500 MHz
Output level RF attenuation auto,
reference level ≥ –15 dBm,
signal level = reference level –20 dBm (nom.)
Aux port
Connector
9-pin D-Sub male
Output TTL-compatible, 0 V/5 V (nom.),
max. 15 mA (nom.)
Input TTL-compatible, max. 5 V (nom.)
IEC/IEEE bus control interface in line with
IEC 625-2 (IEEE 488.2)
Command set SCPI 1997.0
Connector 24-pin Amphenol female
Interface functions SH1, AH1, T6, L4, SR1, RL1, PP1, DC1,
DT1, C0
LAN interface 10/100/1000BaseT
Connector RJ-45
External monitor
Connector
DVI-D, DisplayPort Rev 1.1
Synchronization input
Connector
HDMI
Synchronization output
Connector
HDMI