Atec Rohde-Schwarz-FSH3-6-18 - Manual (Page 17)

R&S FSH3, R&S FSH6, R&S FSH18 Data Sheet
1145.5973.12 TI.17 E-14
Distance-to-Fault Measurement R&S FSH-B1
(only with R&S FSH3 models 1145.5850.13, 1145.5850.23 and R&S FSH6 model 1145.5850.26)
Display 301 pixels
Maximum resolution, distance
to fault maximum zoom cable length/1023 pixels
Display range
Return loss
VSWR
Reflection coefficient
mRho
10, 5, 2, 1 dB/div, linear
1 to 2 ,1 to 6, 1 to 10 und 1 to 20 with option
R&S FSH-K2 in addition
1 to 1.2 and 1 to 1.5
0 to 1, 0 to 0.1, 0 to 0.01, 0 to 0.001
0 to 100, 0 to 100, 0 to 10, 0 to 1
Cable length depending on cable loss 0 m to max. 1000 m
Maximum permissible spurious
signal 1st mixer 1 dB compression point typ. +10 dBm
IF overload at reference level typ. +8 dB
Specification Condition R&S FSH3 R&S FSH6
Transmission measurements (only with R&S FSH3 models 1145.5850.13, 1145.5850.23 and R&S FSH6
model 1145.5850.26)
Frequency range 5 MHz bis 3 GHz 5 MHz bis 6 GHz
Dynamic range
10 MHz to 2.2 GHz
2.2 to 3 GHz
3 to 5 GHz
5 to 6 GHz
scalar mode
vector mode, option
R&S FSH-K2
scalar mode
vector mode, option
R&S FSH-K2
scalar mode
vector mode, option
R&S FSH-K2
scalar mode
vector mode, option
R&S FSH-K2 typ. 60 dB
typ. 80 dB
typ. 50 dB
typ. 65 dB
-
-
-
-
typ. 80 dB
typ. 90 dB
typ. 70 dB
typ. 85 dB
typ. 40 dB
typ. 55 dB
typ. 35 dB
typ. 50 dB