Atec Rohde-Schwarz-FSH-Z1 - Manual (Page 11)

Version 08.00, June 2011
Rohde & Schwarz R&S ® FSH4/FSH8 Spectrum Analyzer 11
Distance-to-fault analysis
Model .24/.28 with R&S ® FSH-K41 option
range 1/2/5/10/20/50/100 dB, linear 100 % Return loss
resolution 0.01 dB
range 1 to 1.1, 1.5, 2, 6, 11, 21 or 71 VSWR
resolution 0.01
Reflection coefficient
mRho range 1 to 1000 in 1, 2, 5 steps
Fault resolution in m (1.5 Ч 10 8 Ч velocity factor/span)
Maximum permissible spurious signal RF attenuation = 0 dB nominal 0 dBm
Input selectable RF port 1 or 2
R&S ® FSH-K44 3GPP WCDMA BTS/NodeB pilot channel and pilot EVM
measurement application
R&S
® FSH-K44E 3GPP WCDMA BTS/NodeB code domain power and EVM
measurement application with HSDPA/HSPA+ analyzer ~
The specifications below apply to the R&S ® FSH4 and R&S ® FSH8. They are based on the data sheet specifications of the R&S ® FSH4
and R&S ® FSH8, have not been checked separately and are not verified during instrument calibration. Measurement uncertainties are
indicated as 95 % confidence intervals. The specified level measurement errors do not take into account systematic errors due to
reduced signal-to-noise ratio (SNR).
Measurements R&S ® FSH-K44 R&S ® FSH-K44E
Spectrum overview ● ●
Scrambling code search ● ●
Isotropic antenna – ●
Result summary ● ●
RF channel power ● ●
Carrier frequency error ● ●
Active channels ● (2 channels) ●
Scrambling code found ● ●
Composite EVM – ●
Peak code domain error – ●
Average RCDE – ●
I/Q offset – ●
Gain imbalance – ●
P-CPICH power ● ●
P-CPICH E
C
/I
0
● ●
P-CPICH symbol EVM ● ●
Sync channel power ● ●
Code domain power – ●
Code channel power – ●
Code channel symbol rate – ●
Channel power – ●
EVM – ●
Code domain channel table – ●
Code channel type – ●
Channel number/spreading factor – ●
Code channel symbol rate – ●
Timing offset – ●
Pilot bits – ●
Status – ●
Power, absolute – ●
Power, relative to CPICH – ●
HSDPA channel support – ●
HSPA+ channel support – ●