Atec Hioki-8847 - Manual (Page 4)

4
One-touch design takes the hassle out of the process. 50mm/sec print speed
Start a measurement
without delay
No more need for cumbersome and time-consuming steps such
as threading the paper between rubber rollers and the thermal
print head. Simply drop the paper roll in place, pull the tip out
slightly, and close the door. As easy as one, two, three.
What
Users
Want
No Problem!
Actual size of printout example
■ Print a complete A4 format report on site
If the customer requires a report, the
8847 can deliver
without delay. The A4 format printout shows waveforms
with high resolution. Even minute details and changes
can be detected easily, and measurement parameters used
for obtaining the data are also printed. Even in the age of
electronic communication, being able to produce a paper
document on the spot can be very effective and result in
enhanced credibility.
■ Hard copy of the display screen, then and there
Observed waveforms, setup parameters,
processing values, AB cursor readouts
and more--a simple push of a button and
the high-speed thermal printer gives
you a hard copy of the entire screen
contents. Saving as a BMP file on a CF
card or USB memory is also possible.
Printing is t wice as fast compared to the perfor mance of
previous HIOKI products. No more waiting when printing out
data on site to give to the customer.
"The customer needs measurement results in hand right away!"
50 mm/s printing speed produces results in a flash No Problem!
"Changing paper is a hassle, and printing speed should be faster!"