Atec EXFO-FTB-8120-8130NGE User Manual
Page 22
FTB-8120NGE/8130NGE Power Blazer
ORDERING INFORMATION
FTB-81
XX
-
XX
-
XX
-
XX
-
XX
-
XX
-
XX
-
XX
-
XX
-
XX
-
XX
-
XX
Model
See models listed in previous page
SONET/SDH Rate Options
155
= 155 Mbit/s (OC-3/STM-1)
622
= 622 Mbit/s (OC-12/STM-4)
2.5G
= 2.5 Gbit/s (OC-48/STM-16)
10G
= 10G Gbit/s (OC-192/STM-64)
a
OTN Rate Options
OTU1
= OTN optical rate 2.7 Gbit/s
OTU2
= OTN optical rate 10.7 Gbit/s
a
OTU2-1e-2e
= OTN optical rates 11.0491/ 11.0957 Gbit/s
a
OTU2-1f-2f
= OTN optical rates 11.2701 Gbit/s and 11.3176 Gbit/s
a
Ethernet Rate Options
LAN/WAN 10GigE
= 10 GigE LAN/WAN
b
10M/100M/1000M
= 10/100/1000Base and GigE optical
100M-O-AP
= 100M optical
Fibre Channel Rate Options
FC1X
= 1X Fibre Channel interface
FC2X
= 2X Fibre Channel interface
FC4X
= 4X Fibre Channel interface
FC10X
= 10X Fibre Channel interface
a
SONET/SDH Options
SONET
= SONET-BASE-SW
SDH
= SDH-BASE-SW
SONET-SDH
= Software option for combined SONET/SDH functionality
G.747
= E1/2M in DS3/45M analysis, as per ITU-T G.747 recommendation
DS1-FDL
= DS1 facility data-link generation/analysis
DS3-FEAC
= DS3 far-end alarms and loopback code words
DUAL RX
= Dual receiver testing mode for DS1 and DS3 interfaces
TCM
= Tandem connection monitoring
INTR-THRU-MODE
= SONET/SDH intrusive Through mode
SMARTMODE
= Real-time signal discovery and alarm/error monitoring per channel
OTN Options
ODUMUX
= ODU MUX functionality
a, c
ODU0
= ODU0 mapping
d
ODUflex
= ODUflex functionality
e
OTN-INTR-THRU
= OTN intrusive Through mode
d
EoOTN
= Ethernet-over-OTN functionality
f
OTU2-GFP-F
= 10GigE LAN mapping into ODU2 using GFP-F
MULTI-CH-SDT
= Multichannel SDT measurements
Next-Generation options
HO-VCAT
= High-order virtual concatenation
LO-VCAT
= Low-order virtual concatenation
LCAS
= Link capacity adjustment scheme
g
GFP-F
= Generic framing procedure—framed
EoS
= Ethernet-over-SONET/SDH
h
Ethernet Options
100optical
= 100 Mbit/s optical Ethernet
Frame-Analyzer
= Multiple stream generation and analysis
PBB-TE
= PBB-TE testing
MPLS
= MPLS testing
Adv_filtering
= Advanced filtering capabilities
IPv6
= IPv6 testing capabilities
TCP-THPUT
= TCP throughput testing
EtherSAM
= EtherSAM (Y.156sam) testing
Data_Capture
= Data capture and decode capabilities
TRAFFIC-SCAN
= VLAN/MPLS traffic scan
Example: FTB-8120NGE-SONET-SDH-155-622-2.5G-OTU1-HO-VCAT-8190-8590
Transceivers XFP test port
a
00
= Without XFP telecom
FTB-81
900
= Multirate (10-11.3 Gbit/s) optical XFP transceiver module
with LC connector; 1310 nm; 10 km reach
FTB-81
901
= Multirate (10/10.7 Gbit/s) optical XFP transceiver module
with LC connector; 1550 nm; 40 km reach
FTB-81
902
= Multirate (10/10.7 Gbit/s) optical XFP transceiver module
with LC connector; 1550 nm; 80 km reach
FTB-
85900
= 10GBase-SR/-SW (850 nm, LAN/WAN PHY)
LC connectors; optical XFP transceiver module
FTB-
85901
= 10GBase-LR/-LW (1310 nm, LAN/WAN PHY)
LC connectors; optical XFP transceiver module
FTB-
85902
= 10GBase-ER/-EW (1550 nm, LAN/WAN PHY)
LC connectors; optical XFP transceiver module
Transceivers SFP Ethernet add/drop port
a, i
00
= Without Ethernet add/drop
FTB-81
90
= Multirate (155/622 Mbit/s, 2.5/2.7 Gbit/s, GigE/FC/2FC)
optical SFP transceiver module with LC connector;
1310 nm; 15 km reach
FTB-81
91
= Multirate (155/622 Mbit/s, 2.5/2.7 Gbit/s, GigE/FC/2FC)
optical SFP transceiver module with LC connector;
1310 nm; 40 km reach
FTB-81
92
= Multirate (155/622 Mbit/s, 2.5/2.7 Gbit/s, GigE/FC/2FC)
optical SFP transceiver module with LC connector;
1550 nm; 80 km reach
FTB-81
93
= Multirate (155/622 Mbit/s, 2.5/2.7 Gbit/s, GigE/FC/2FC)
optical SFP transceiver module with LC connector;
1550 nm; 40 km reach
FTB-85
90
= GigE/FC/2FC optical SFP transceiver module with LC
connector; 850 nm; MMF, <500 m reach
FTB-85
91
= GigE/FC/2FC optical SFP transceiver module with LC
connector; 1310 nm; 10 km reach
FTB-85
92
= GigE/FC/2FC optical SFP transceiver module with LC
connector; 1550 nm; 90 km reach
Transceivers SFP test port
a
00
= SFP test port
FTB-81
90
= Multirate (155/622 Mbit/s, 2.5/2.7 Gbit/s, GigE/FC/2FC)
optical SFP transceiver module with LC connector;
1310 nm; 15 km reach
FTB-81
91
= Multirate (155/622 Mbit/s, 2.5/2.7 Gbit/s, GigE/FC/2FC)
optical SFP transceiver module with LC connector;
1310 nm; 40 km reach
FTB-81
92
= Multirate (155/622 Mbit/s, 2.5/2.7 Gbit/s, GigE/FC/2FC)
optical SFP transceiver module with LC connector;
1550 nm; 80 km reach
FTB-81
93
= Multirate (155/622 Mbit/s, 2.5/2.7 Gbit/s, GigE/FC/2FC)
optical SFP transceiver module with LC connector;
1550 nm; 40 km reach
FTB-85
910
j
= 100Base-FX (1310 nm) MM, LC connectors; optical SFP
transceiver module for FTB-8510B Packet Blazer
FTB-85
911
j
= 100Base-LX (1310 nm) SM, LC connectors; optical SFP
transceiver module for FTB-8510B Packet Blazer
FTB-85
912
i
= SFP modules GigE/FC/2FC/4FC at 850 nm, MMF,
<500 m
FTB-85
913
i
= SFP modules GigE/FC/2FC/4FC at 1310 nm, SMF,
<4 km
FTB-85
914
i
= SFP modules GigE/FC/2FC/4FC at 1310 nm, SMF,
<30 km
FTB-85
915
i
= SFP modules GigE/FC/2FC/4FC at 1550 nm, SMF,
<40 km
NOTES
a. Applies only to FTB-8130NGE, except the FTB-8130NGE-2.5G.
b. Applies only to FTB-8130NGE and FTB-8130NGE-2.5G.
c. Must be combined with the OTU1 and OTU2 options.
d. Must be combined with the OTU1 or OTU2 option.
e. Applicable for FTB-8130NGE modules only (except the FTB-8130NGE-2.5G) and must be combined with the OTU2 option.
f. Must be combined with the OTU2-1e-2e or OTU2-GFP-F or ODU0 option.
g. Must be combined with the HO-VCAT or LO-VCAT option.
h. Must be combined with the GFP-F option.
i. Available with 4x Fibre Channel interface only.
j. Multiple options can be purchased to suit the required test application.