Atec EXFO-FTB-8120-8130NGE - Manual (Page 20)

FTB-8120NGE/8130NGE Power Blazer
fiBrE channEl intErfacES
ADDITIONAL FEATURES
Expert mode Ability to set thresholds in RFC 2544 and BERT mode to provide a pass/fail status.
Scripting
The built-in Visual Basic .NET scripting engine and embedded macrorecorder provide a simple means of automating test cases and routines.
Embedded scripting routines provide a powerful means of creating advanced test scripts. a
Event logger Supports logging of test results, and the ability to print, export (to a file), or export the information contained in the logging tool.
Power up and restore a In the event of a power failure to the unit, the active test configuration and results are saved and restored upon bootup.
Save and load configuration Ability to store and load test configurations to/from non-volatile memory.
Configurable test views
Allows users to customize their test views; i.e., to dynamically insert or remove test tabs/windows, in addition to creating new test windows,
so as to accurately match their testing needs. a
Configurable test timer Allows a user to set a specific start, stop and duration for tests.
Test favorites Capability to select and load from predefined or user-modified test conditions.
Report generation Ability to generate test reports in the following user-selectable formats: .pdf, .html, .txt and .csv.
Graph Allows to graphically display the test statistics of the performance (RFC 2544).
Screen capturing b Capability to gather a snap-shot of the screen for future use.
Logger printing b Capability to send logger messages to a supported local printer.
Remote control Remote control through Visual Guardian Lite software or VNC.
Notes
a. Available on the FTB-500 platform only.
b. Available on the FTB-200 platform only.
c. Values in the table correspond to FC-1 rate. For FC-2, maximum reach is 300 m on 50/125 µm MMF and 150 m on
62.5/125 µm MMF. For FC-4, maximum reach is 150 m on 50/125 µm MMF and 70 m on 62.5/125 µm MMF.
FC-1X/2X/4X
Wavelength (nm) 850 1310 1310 1550
Tx level (dBm) –9 to –2.5 –8.4 to –3 0 to 5 1 to 5
Rx level sensitivity (dBm) –15 at FC-4
–18 at FC-2
–20 at FC-1
–18 at FC-4
–21 at FC-2
–22 at FC-1
–18 at FC-4
–21 at FC-2
–22 at FC-1
–16.5 at FC-4
–20.5 at FC-2
–22 at FC-1
Maximum reach 500 m on 50/125 µm MMF c
300 m on 62.5/125 µm MMF c
4 km 30 km 40 km
Transmission bit rate (Gbit/s) 1.06/2.125/4.25 1.06/2.125/4.25 1.06/2.125/4.25 1.06/2.125/4.25
Reception bit rate (Gbit/s) 1.06/2.125/4.25 1.06/2.125/4.25 1.06/2.125/4.25 1.06/2.125/4.25
Tx operational wavelength range (nm) 830 to 860 1260 to 1350 1285 to 1345 1544.5 to 1557.5
Measurement uncertainty (accuracy)
Frequency (ppm)
Optical power (dB)
±4.6
±2
±4.6
±2
±4.6
±2
±4.6
±2
Max Rx before damage (dBm) 3 3 3 3
Jitter compliance ANSI FC-PI-2 ANSI FC-PI-2 ANSI FC-PI-2 ANSI FC-PI-2
FC classification ANSI FC-PI-2 ANSI FC-PI-2 ANSI FC-PI-2 ANSI FC-PI-2
Laser type VCSEL Fabry-Perot DFB DFB
Eye safety Class 1 Class 1 Class 1 Class 1
Connector LC LC LC LC
Transceiver type SFP SFP SFP SFP
FC-10X
Wavelength (nm) 850 1310 1310 1550 1550
Tx level (dBm) –5 to –1 0.5 max –6 to –1 –1 to 2 0 to 4
Rx level sensitivity (dBm) –11.1 –12.6 –14.4 –16 –23
Maximum reach 300 m on 50/125 µm MMF
30 m on 62.5/125 µm MMF
10 km 10 km 40 km 80 km
Transmission bit rate (Gbit/s) 10.5 10.5 10.5 10.5 10.5
Reception bit rate (Gbit/s) 10.5 10.5 10.5 10.5 10.5
Tx operational wavelength range (nm) 840 to 860 1260 to 1355 1290 to 1330 1530 to 1565 1530 to 1565
Measurement uncertainty (accuracy)
Frequency (ppm)
Optical power (dB)
±4.6
±2
±4.6
±2
±4.6
±2
±4.6
±2
±4.6
±2
Max Rx before damage (dBm) 6 6 6 2 4
Jitter compliance ANSI FC-PI-3 ANSI FC-PI-3 ANSI FC-PI-3 ANSI FC-PI-3 ANSI FC-PI-3
FC classification ANSI FC-PI-3 ANSI FC-PI-3 ANSI FC-PI-3 ANSI FC-PI-3 ANSI FC-PI-3
Laser type VCSEL DFB DFB EML EML
Eye safety Class 1 Class 1 Class 1 Class 1 Class 1
Connector LC LC LC LC LC
Transceiver type XFP XFP XFP XFP XFP
EthErnEt functional SPEcificationS (cont’d)