Atec EXFO-FTB-8120-8130NGE - Manual (Page 16)

FTB-8120NGE/8130NGE Power Blazer
ADDITIONAL FEATURES
Scripting
The built-in scripting engine and embedded macro-recorder provide a simple means of automating test cases and routines.
Embedded scripting routines provide a powerful means of creating advanced test scripts. Available only on the FTB-500 platform.
Reports Supports generation of test reports in .html, .csv, .txt, .pdf formats. Contents of reports are customizable by the user.
Power-up and restore In the event of a power failure to the unit, the active test configuration and test logger are saved and restored upon bootup.
Store and load configurations Ability to store and load test configurations to/from non-volatile memory.
Alarm hierarchy
Alarms are displayed according to a hierarchy based on root cause. Secondary effects are not displayed.
This hierarchy serves to facilitate alarm analysis.
Configurable test views
This allows users to customize their test views; i.e., to dynamically insert or remove test tabs/windows, in addition to creating new test
windows, so as to accurately match their testing needs. Available only on the FTB-500 user interface.
Configurable test timer Provides the ability for a user to set predefined test start and stop times.
Remote control
Available with Windows-based remote management software known as Visual Guardian Lite (optional software package).
This allows users to remotely monitor and control the FTB-8120NGE/8130NGE modules via standard Ethernet connection.
OTN FUNCTIONAL SPECIFICATIONS
OTN Standards compliance ITU-T G.709, ITU G.798, ITU G.872
Interfaces OTU1 (2.7 Gbit/s), OTU2 (10.7 Gbit/s), OTU1e (11.0491 Gbit/s), OTU2e (11.0957 Gbit/s),
OTU1f (11.2701 Gbit/s), OTU2f (11.3176 Gbit/s)
Client types a All supported SONET/SDH mappings (including next-generation GFP, VCAT, LCAS), NULL, PRBS (2E31-1),
ODU1 into OTU2 multiplexing.
OTU Layer Errors OTU-FAS, OTU-MFAS, OTU-BEI, OTU-BIP-8
Alarms LOF, OOF, LOM, OOM, OTU-AIS, OTU-TIM, OTU-BDI, OTU-IAE, OTU-BIAE
Traces 64-bytes Trail Trace Identifier (TTI) as defined in ITU-T G.709
ODU TCM Layer Errors TCMi-BIP-8, TCMi-BEI (i = 1 to 6)
Alarms TCMi-LTC, TCMi-TIM, TCMi-BDI, TCMi-IAE, TCMi-BIAE
Traces 64-bytes Trail Trace Identifier (TTI) as defined in ITU-T G.709
ODU Layer Errors ODU-BIP-8, ODU-BEI
Alarms ODU-AIS, ODU-OCI, ODU-LCK, ODU-TIM, ODU-BDI, ODU-FSF, ODU-BSF, ODU-FSD, ODU-BSD
Traces Generates 64-bytes Trail Trace Identifier (TTI) as defined in ITU-T G.709
FTFL b As defined in ITU-T G.709
ODU0 Muxing ODU0 into ODU1, ODU0 into ODU2
Client types Pattern, OC-3/STM-1, OC-12/STM-4, GigE using GFP-T
GFP-T errors SB Correctable, SB Uncorrectable, 10B_ERR
ODU Multiplexing c Alarms OPU-MSIM, ODU-LOFLOM
ODUflex Muxing ODUflex into ODU2
Client types Ethernet using GFP-F or pattern for constant bit rate (CBR)
OPU Layer Alarm OPU-PLM
Payload type (PT) label Generates and displays received PT value
Forward Error Correction (FEC) Errors FEC-Correctable (Codeword), FEC-Uncorrectable (Codeword), FEC-Correctable (Symbol),
FEC-Correctable (Bit), and FEC-Stress (Codeword)
Ethernet over OTN (EoOTN) c Mapping Direct mapping into OTU1e or OTU2e or using GFP-F into OTU2
BERT Framed layer 2 supported with or without VLAN
Pattern PRBS 2E9-1, PRBS 2E11-1, PRBS 2E15-1, PRBS 2E20-1, PRBS 2E23-1, PRBS 2E31-1
and up to 10 user patterns. Capability to invert patterns
Error insertion FCS, 64B/66B block, bit
Error measurement Jabber/giant, runt, undersize, oversize, FCS, 64B/66B block
Error measurement (BERT) Bit error, bit mismatch 0, bit mismatch 1
Alarm insertion Link down, local fault, remote fault, pattern loss
Alarm detection Link down, local fault, remote fault, pattern loss
VLAN Capability to generate one stream with one layer of VLAN
Ethernet statistics Multicast, broadcast, unicast, N-unicast, frame size distribution, bandwidth, utilization, frame rate
otn functional SPEcificationS
Notes
a. Available with ODUMUX option.
b. Fault type and fault location.
c. Available on the FTB-8130NGE only.
ADDITIONAL FUNCTION
Service disruption time (SDT)
measurements The service disruption time test tool measures the time during which there is a disruption of service due to the network switching
from the active channels to the backup channels. User-selectable triggers: all supported alarms and errors.
Measurements: last disruption, shortest disruption, longest disruption, average disruption, total disruption, and service disruption count.
Round-trip delay (RTD)
measurements The round-trip delay test tool measures the time required for a bit to travel from the FTB-8120NGE/8130NGE transmitter back to its
receiver after crossing a far-end loopback. Measurements are supported on all supported FTB-8120NGE/8130NGE interfaces and
mappings. Measurements: last RTD time, minimum, maximum, average, measurement count (no. of successful RTD tests), failed measurement count.
Multichannel testing Ability to monitor in real-time errors and alarms, and to perform simultaneous SDT measurements for all ODU0 channels;
a user-defined threshold can also be applied to the SDT measurements for simple pass/fail results for each channel.
SonEt/Sdh functional SPEcificationS (cont’d)