Atec EXFO-FTB-8120-8130NGE - Manual (Page 21)

FTB-8120NGE/8130NGE Power Blazer
additional SPEcificationS
FTB-8120NGE a FTB-8130NGE a
Next-generation SONET/SDH 2.5 Gbit/s and OTN 2.7 Gbit/s Next-generation SONET/SDH 10 Gbit/s and OTN 10.7 Gbit/s
Supports up to 2.5/2.7 Gbit/s optical rates, as well as electrical DSn/PDH interfaces Supports up to 10/10.7 Gbit/s optical rates, as well as electrical DSn/PDH interfaces
Test Interfaces
OTN: OTU1 (2.7 Gbit/s) OTN: OTU1 (2.7 Gbit/s), OTU2 (10.7 Gbit/s)
OTU1e (11.0491 Gbit/s), OTU2e (11.0957 Gbit/s)
OTU1f (11.2701 Gbit/s), OTU2f (11.3176 Gbit/s)
SONET: STS-1e, STS-3e, OC-3, OC-12, OC-48 SONET: STS-1e, STS-3e, OC-3, OC-12, OC-48, OC-192
SDH: STM-0e, STM-1e, STM-0, STM-4, STM-16 SDH: STM-0e, STM-1e, STM-0, STM-4, STM-16, STM-64
DSn: DS1, DS3, Dual DS1 Rx, Dual DS3 Rx DSn: DS1, DS3, Dual DS1 Rx, Dual DS3 Rx
PDH: E1, E2, E3, E4 PDH: E1, E2, E3, E4
Ethernet: 10/100/1000M electrical and 100/1000M optical Ethernet: 10/100/1000M electrical, 100/1000M optical and 10 GigE LAN/WAN
FC: 1x, 2x, 4x FC: 1x, 2x, 4x, 10x
GENERAL SPECIFICATIONS
FTB-8120NGE FTB-8130NGE
Weight (without transceiver) 0.9 kg (2.0 lb) 0.9 kg (2.0 lb)
Size (H x W x D) 96 mm x 51 mm x 288 mm (3 3 / 8 in x 2 in x 11 3 / 8 in) 96 mm x 51 mm x 288 mm (3 3 / 8 in x 2 in x 11 3 / 8 in)
Temperature
operating
storage
0 °C to 40 °C (32 °F to 104 °F)
–40 °C to 60 °C (–40 °F to 140 °F)
0 °C to 40 °C (32 °F to 104 °F)
–40 °C to 60 °C (–40 °F to 140 °F)
Note
a. Modules can also be purchased as FTB-8120NGE-FLEX and FTB-8130NGE-FLEX, which provides maximum configuration
flexibility, allowing all rates and options shown in “Ordering Information” to be ordered individually.
fiBrE channEl functional SPEcificationS
TESTING (1X, 2X, 4X AND 10X)
BERT Unframed, framed FC-1, framed, FC-2
Patterns (BERT) PRBS 2E31-1, 2E23-1, 2E20-1, 2E15-1, 2E11-1, 2E9-1 CSPAT, CRPAT, CJTPAT, and 10 user-defined 32 bits patterns
Error insertion Bit error, symbol error, oversize error, CRC error, undersize error and block error
Error measurement Bit error, symbol error, oversize error, CRC error, undersize error and block error
Alarm insertion LOS, pattern loss
Alarm detection LOS, pattern loss
Buffer-to-buffer credit testing Buffer-to-buffer credit estimation based on latency
Latency Round-trip latency measurement
ADDITIONNAL TEST AND MEASUREMENT FUNCTIONS (1X, 2X, 4X AND 10X)
Power measurement Supports optical power measurement, displayed in dBm.
Frequency measurement Supports clock frequency measurements (i.e., received frequency and deviation of the input signal clock from nominal frequency).
Frequency offset measurement Range: ±120 ppm
Resolution: 1 ppm
Uncertainty (accuracy): ±4.6 ppm