Atec Agilent-N9320B - Manual (Page 3)

3
Supplemental information
Frequency
Range 9 kHz to 3 GHz AC coupled
100 kHz to 3 GHz Preamp on
Resolution 1 Hz
Internal 10 MHz frequency reference
Aging rate ± 1 ppm/year
Temperature stability ± 1 ppm 5 to +45 °C, reference 25 °C
Supply voltage stability ± 0.3 ppm
Residual FM ≤ 100 Hz p-p in 100 ms nominal RBW = 1 kHz, VBW = 1 kHz
Frequency readout accuracy (start, stop, center, marker)
Marker resolution (freq span)/(number of sweep point -1)
Uncertainty ± (freq indication x freq reference uncertainty 1 + 1% x span + 20% x resolution
bandwidth + marker resolution)
Sweep point 461, fixed
Marker frequency counter
Resolution 1 Hz, 10 Hz, 100 Hz, 1 kHz Selectable
Accuracy ± [(marker freq x freq reference uncertainty 1 ) + (counter resolution)]
Frequency span (FFT and swept mode)
Range 0 Hz (zero span), 100 Hz to 3.0 GHz
Resolution 1 Hz
Accuracy ± span/(swept points -1)
Sweep time and triggering
Span range 10 ms to 1000 s Span > 0 Hz
6 μs to 200 s Span = 0 Hz (minimum resolution = 6 μs)
Mode Continuous, single
Trigger Free run, video, external
Trigger slope Positive or negative edge Selectable
Trigger delay 0 to 80 sweep time
Resolution bandwidth (RBW)
Range (-3 dB bandwidth) 10 Hz to 1 MHz, in 1-3-10 sequence
Accuracy ± 5% nominal
Resolution filter shape factor < 5:1 nominal
Range (-6 dB bandwidth) 200 Hz, 9 kHz, 120 kHz, 1 MHz EMI bandwidth (CISPR 16-1-1 complaint),
requires Option EMF
Accuracy ± 10% nominal
Resolution filter shape factor < 5:1 nominal -60 dB/-6 dB bandwidth ratio
Video bandwidth (VBW)
Range 1 Hz to 1 MHz in 1-3-10 sequence -3 dB bandwidth
1. Frequency reference uncertainty = Aging rate x period since adjustment + supply voltage stability + temperature stability.
Frequency and Time Specification