Atec Anritsu-68369ANV - Manual (Page 22)

20
Models
Synthesized CW Generators
68017C, 0.01 to 8.4 GHz 69017B, 0.01 to 8.4 GHz
68037C, 2 to 20 GHz 69037B, 2 to 20 GHz
68047C, 0.01 to 20 GHz 69047B, 0.01 to 20 GHz
68067C, 0.01 to 40 GHz 69067B, 0.01 to 40 GHz
68077C, 0.01 to 50 GHz 69077B, 0.01 to 50 GHz
68087C, 0.01 to 60 GHz 69087B, 0.01 to 60 GHz
68097C, 0.01 to 65 GHz 69097B, 0.01 to 65 GHz
Synthesized Signal Generators
68117C, 0.01 to 8.4 GHz 69117B, 0.01 to 8.4 GHz
68137C, 2 to 20 GHz 69137B, 2 to 20 GHz
68147C, 0.01 to 20 GHz 69147B, 0.01 to 20 GHz
68167C, 0.01 to 40 GHz 69167B, 0.01 to 40 GHz
68177C, 0.01 to 50 GHz 69177B, 0.01 to 50 GHz
68187C, 0.01 to 60 GHz 69187B, 0.01 to 60 GHz
68197C, 0.01 to 65 GHz 69197B, 0.01 to 65 GHz
Synthesized High Performance Signal Generators
68317C, 0.01 to 8.4 GHz 69317B, 0.01 to 8.4 GHz
68337C, 2 to 20 GHz 69337B, 2 to 20 GHz
68347C, 0.01 to 20 GHz 69347B, 0.01 to 20 GHz
68367C, 0.01 to 40 GHz 69367B, 0.01 to 40 GHz
68377C, 0.01 to 50 GHz 69377B, 0.01 to 50 GHz
68387C, 0.01 to 60 GHz 69387B, 0.01 to 60 GHz
68397C, 0.01 to 65 GHz 69397B, 0.01 to 65 GHz
Options
Option 1, Rack Mounting: Rack mount kit containing a set
of track slides (90˚ tilt capability), mounting ears, and front panel
handles to let the instrument be mounted in a standard 48 cm
equipment rack.
Option 2A, Step Attenuator: Adds a 10 dB/step attenuator
for models having a high-end frequency of ≤20 GHz. Rated
RF output power is reduced.
Option 2B, Step Attenuator: Adds a 10 dB/step attenuator
for models having a high-end frequency of ≤ 40 GHz. Rated
RF output power is reduced.
Option 2C, Step Attenuator: Adds a 10 dB/step attenuator
for models having a high-end frequency of ≤ 50 GHz. Rated
RF output power is reduced.
Option 2D, Step Attenuator: Adds a 10 dB/step attenuator
for models having a high-end frequency of ≤ 60 GHz. Rated
RF output power is reduced.
Option 2E, Electronic Step Attenuator: Adds a 10 dB/step
electronic attenuator for models having a high-end frequency of
≤8.4 GHz. Rated RF output power is reduced.
Option 2F, Electronic Step Attenuator: Adds a 10 dB/step
electronic attenuator for models having a high-end frequency of
≤20 GHz. Rated RF output power is reduced.
Option 6, Phase Modulation ( ΦM) (683xxC and 693xxB):
Provides phase modulation capability. FM input, FM output
and FM generator become FM/
ΦM input, FM/ΦM output and
FM/ ΦM generator.
Option 7, Delete AM/FM Generators (683xxC and 693xxB):
Deletes the internal AM and FM generators. External AM and FM
capability remains unchanged. (Not available in combination with
Option 8 or Option 20.)
Option 8, Internal Power Measurement (683xxC and
693xxB): Adds an internal power measurement function that is
compatible with Anritsu 560-7, 5400-71 or 6400-71 series
detectors. (Not available in combination with Option 7)
Option 9, Rear Panel RF Output: Moves RF output connector
to the rear panel.
Option 10, User-defined Modulation Capability (683xxC,
and 693xxB): Provides user-defined waveform capability.
Requires controller (not included). Includes cable and Windows ®
based software.
Option 11, 0.1 Hz Frequency Resolution: Provides frequency
resolution of 0.1 Hz.
Option 14, Anritsu 360B VNA Compatibility:
Modifies rack mounting hardware to mate the unit in an Anritsu
360B VNA console.
Option 15A, High Power Output (680xxC, 681xxC, 690xxB
and 691xxB): Adds high power RF components to the
instrument in the 2 −20 GHz frequency range.
Option 15B, High Power Output (683xxC and 693xxB):
Adds high-power RF components to the instrument in the
2–20 GHz frequency range.
Option 16, High Stability Time Base: Adds an ovenized,
10 MHz crystal oscillator as a high-stability time base. Derate
phase noise specification at 10 Hz offset by 8 dB.
Option 17A, Delete Front Panel (68100C, 68300C, 69100B
and 69300B): Deletes the front panel for use in remote control
applications where a front panel display and keyboard control are
not needed.
Option 17B, Delete Front Panel (68000C and 69000B):
Deletes the front panel for use in remote control applications
where a front panel display and keyboard control are not needed.
Option 18, mmWave Bias Output: Adds rear panel bias output
to drive 54000-xWRxx millimeter wave source modules. BNC
Twinax connector. (Not available in combination with Option 20.)
Option 19, SCPI Programmability : Adds GPIB command
mnemonics complying with Standard Commands for
Programmable Instruments (SCPI), Version 1993.0. SCPI
programming complies with IEEE 488.2–1987.
Option 20, SCAN Modulator : Adds an internal SCAN modulator
for simulating high-depth amplitude modulated signals in models
68337C, 68347C, 69337B and 69347B only. Requires an external
modulating signal input. (Not available in combination with
Option 7, Option 18, or Option 22.)
Option 21A, (690xxB, 691xxB):
Low Phase Noise, Non-pulsed Digital Downconverter replaces
standard analog downconverter on units with low frequency limit
of 10 MHz. CW only from 10 MHz to 2.2 GHz
Option 21B, (693xxB): Low Phase Noise, Pulsed Digital
Downconverter replaces standard analog downconverter on units
with low frequency limit of 10 MHz. CW with pulse modulation
from 10 MHz to 2.2 GHz
Option 22, 0.1 Hz to 10 MHz Audio Frequency:
Adds CW and step sweep frequency coverage below 10 MHz.
No modulation is available below 10 MHz. Derate output power by
1 dB for
≤20 GHz and 2 dB for >20 GHz (Not available in
combination with Option 20.)
ORDERING INFORMATION