Atec Anritsu-68369ANV - Manual (Page 2)

VALUE WITHOUT COMPROMISE
Your microwave signal generation requirements have never been tougher, and yet your capital equipment budget has never been
tighter. You need the most value you can get in a synthesizer, but you can’t compromise performance. You need a synthesizer
that meets today’s needs yet can be upgraded at a reasonable cost to satisfy future requirements without shattering your test
equipment budget. Anritsu’s 68C/69B series of synthesizers deliver the highest performance and the highest value available
today. Match your application to one of these source types:
High Performance Signal Generators
The ultimate in full-function signal generation. They provide all
the features of the other families along with comprehensive,
high-performance modulation for signal simulation applications.
Additional features in these units include:
■ Internal pulse generator with swept delay capability for moving
target simulation
■ Flexible pulse triggering including free-run, delayed, gated,
and composite
■ 0 to 90% AM, log or linear, over DC to 100 kHz rates
■ Four FM modes for up to 10 MHz at 8 MHz rates
or 100 MHz deviation at 100 Hz rates
■ Optional phase modulation ( ΦM) up to 400 radians
at 1 MHz rates
■ Internal AM, FM, and ΦM generators, each with
7 modulating waveforms
■ Optional user-defined, downloaded complex modulation
■ Optional AM SCAN modulator with 60 dB modulation depth
Anritsu Synthesized Signal Generators
All the features of the CW generators plus analog sweep and external
modulation for network analysis and A.T.E. applications.
■ Fast analog sweep
■ External FM, locked or unlocked
■ External AM, log or linear
Anritsu Synthesized CW Generators
These basic signal sources provide accurate outputs over a wide frequency
and power range for Local Oscillator duty and other CW applications.
■ Broad frequency coverage including 0.1 Hz to 65 GHz in
a single coax output
■ Ultra-low SSB phase noise and spurious
■ +17 dBm guaranteed leveled power to 20 GHz
■ 0.1 Hz optional frequency resolution
■ <5 ms switching time for <100 MHz sweep steps
■ Digital frequency sweep and digital power sweep
■ Wide dynamic range with accurate output levels
■ Intuitive, menu-driven front panel