Atec Agilent-81180A - Manual (Page 2)

2
81180A at a glance
• 10-MS/s to 4.2-GSa/s sample clock control, 2 GHz IQ modulation bandwidth and 12 bit vertical resolution
• 1 or 2 channel, coupled or uncoupled
• Two 2-channel systems can be synchronized to form a 4-channel system
• Interchannel skew control from -3 ns to +3 ns with 10-ps resolution
• Three software-selectable amplifiers optimized for
• I/Q applications with 1 GHz, differential DC-coupled output
• Maximum bandwidth and flatness for direct RF applications with AC output bandwidth
to > 1.5 GHz
• Time domain applications with low overshoot and jitter
• 16 M points or 64 M points per channel
• 8-bit external input for dynamic control of segments and sequences
• Advanced sequencing scenarios define stepping, looping and conditional jumps of waveforms or waveform
sequences for best memory usage
• Smart trigger allows trigger hold-off and programmable pulse width
• Trigger input is programmed to wait for waveform end or abort waveform and restart
• Two markers for each channel have controlled marker positions, widths and levels
• Markers do not reduce DAC bits
• Internal flash memory stores settings and waveforms
• Remote control through LAN, USB and GPIB
• Waveforms and instrument settings can be uploaded from disk-on-key
• Integration in
• MATLAB ®
• NI LabVIEW
• Agilent Signal Studio 1
• Agilent BenchLink Waveform Builder Pro 2
1. Integration in Signal Studio pulse builder and multitone is planned.
2. Available by end of 2010