beautypg.com

Atec Anritsu-MG3670 Series User Manual

Page 6

background image

For product ordering information, see pages 4-7.

www.anritsu.com

295

RADIO COMMUNICATIONS, EMI MEASURING TEST INSTRUMENTS

6

Applicable communication system

GSM, DCS1800 (PCN), CT2

Modulation system

GMSK

I/Q signal:

≤1˚ rms, ≤3˚ peak (at 1 Vrms/50 Ω output, 25˚ ±5˚C, after 30 min. warm-up)

Phase error

≤2˚ rms, ≤5˚ peak (at 1 Vrms/50 Ω output)

RF signal:

≤1˚ rms, ≤3˚ peak (at ≤+5 dBm output, 25˚ ±5˚C, after 30 min. warm-up)

≤2˚ rms, ≤5˚ peak (at ≤+5 dBm output)

Internal modulation data

Pseudorandom pattern: PN15, PN9, free 4-bit repetition pattern (ex: 1010, 1111)

DATA CLOCK: Covering ±5% of bit rate, DATA: Digital data synchronized with DATA CLOCK

External modulation data

*

TTL level, BNC connector, polarity selectable

Selectable 50

Ω or CMOS (600 Ω), BNC connector

50

Ω setting (modulation data: 0000): 1 Vp-p ±2% (MG3670A/B/C, MG3671A/B), 2 Vp-p ±2% (MG3672A)

CMOS setting (modulation data: 0000)

I/Q signal output

Variable in 10% steps over range of 10% to 100% of 1 Vp-p ±2%, variable offset voltage: 0 to 4 V in 1 mV steps
(MG3670A/B/C, MG3671A/B), Variable in 10% steps over range of 10% to 100% of 2 Vp-p ±2%, variable offset voltage:
0 to 4 V in 1 mV steps (MG3672A)

Carrier wave frequency range:

1 to 2250 MHz*

1

(incorporated in the MG3670B/C), 1 to 2750 MHz (incorporated in the MG3671A/B and MG3672A)

GSM/PCN (DCS1800)

Bit rate: 270.833 kbps
Baseband filter: Gaussian filter BbT = 0.3

Carrier wave frequency range: 300 kHz to 2250 MHz*

1

(incorporated in the MG3670B/C),

CT2

300 kHz to 2750 MHz (incorporated in the MG3671A/B and MG3672A)

Bit rate: 72 kbps
Baseband filter: Gaussian filter BbT = 0.5

*

1: The upper frequency is limited by the specifications of the mainframe in which this unit is installed.

MG0305A GFSK Modulation Unit (incorporated in the MG3670B/C, MG3671A/B and MG3672A)

MG0302A GMSK Modulation Unit (incorporated in the MG3670B/C, MG3671A/B and MG3672A)

Applicable communication system

DECT

Modulation system

GFSK

Vector error

I/Q signal:

≤12 kHz (at 1 Vrms/50 Ω output), RF signal: ≤12 kHz (at ≤+5 dBm output, modulation data: FFFF)

Internal modulation data

Pseudo-random pattern: PN15/PN9, Free 16-bit repetition pattern (ex: 0F0F, 00FF)

DATA CLOCK: Covering ±5% of bit rate, DATA: Digital data synchronized with DATA CLOCK

External modulation data

*

TTL level, BNC connector, polarity selectable

Selectable 50

Ω or CMOS (600 Ω), BNC connector

50

Ω setting (modulation data: 0000): 1 Vp-p ±6% (MG3670A/B/C, MG3671A/B), 2 Vp-p ±6% (MG3672A)

CMOS setting (modulation data: 0000)

I/Q signal output

Variable in 10% steps over range of 10% to 100% of 1 Vp-p ±6%, variable offset voltage: 0 to 4 V in 1 mV steps
(MG3670A/B/C, MG3671A/B), Variable in 10% steps over range of 10% to 100% of 2 Vp-p ±6%, variable offset voltage:
0 to 4 V in 1 mV steps (MG3672A)

Phase polarity

Polarity reversal of frequency deviation during modulation is possible.

Carrier frequency range:

5 to 2250 MHz*

1

(incorporated in the MG3670B/C), 5 to 2750 MHz (incorporated in the MG3671A/B and MG3672A)

DECT

Bit rate: 1152 kbps
Deviation ratio: 70% (202 kHz), 90% (259 kHz), 100% (288 kHz), 140% (403 kHz), at BbT=0.5
Baseband filter: Gaussian filter BbT = 0.4, 0.5, 0.6, at deviation ratio = 100%

*

1: The upper frequency is limited by the specifications of the mainframe in which this unit is installed.

MG0307A

π/4 DQPSK Modulation Unit (incorporated in the MG3670B/C, MG3671A/B and MG3672A)

Applicable communication system

PACS, WCPE, PHS

Modulation system

π/4 DQPSK

Vector error

I/Q signal:

≤1.5%rms (at 1 Vrms/50 Ω output), RF signal: ≤1.8%rms (at ≤+5 dBm output)

Pseudo-random pattern: PN15, PN9

Internal data mode

Free 16-bit repetition pattern (ex: 0F0F, 00FF): WCPE
Free 4-bit repetition pattern (ex: 0101, 0011): PACS, PHS

DATA CLOCK: Covering ±5% of bit rate

External data mode

DATA: Digital data synchronized with DATA CLOCK
SYMBOL CLOCK: Clock specified by DATA synchronized with DATA CLOCK
TTL level, BNC connector, polarity selectable

Selectable 50

Ω or CMOS (600 Ω), BNC connector

50

Ω setting (modulation data: 0000): 1 Vp-p ±5% (MG3670A/B/C, MG3671A/B), 2 Vp-p ±5% (MG3672A)

I/Q signal output

CMOS setting (modulation data: 0000)

Variable in 10% steps over range of 10% to 100% of 1 Vp-p ±5%, variable offset voltage: 0 to 4 V in 1 mV steps
(MG3670A/B/C, MG3671A/B), Variable in 10% steps over range of 10% to 100% of 2 Vp-p ±5%, variable offset voltage:
0 to 4 V in 1 mV steps (MG3672A)

Phase encode function

Invertible phase polarity at modulation

Carrier frequency range:

1 to 2250 MHz*

1

(incorporated in the MG3670B/C), 1 to 2750 MHz (incorporated in the MG3671A/B and MG3672A)

PACS

Bit rate: 384 kbps
Baseband filter: Root Nyquist (

α = 0.5), Nyquist (α = 0.5)

Carrier frequency range:

5 to 2250 MHz*

1

(incorporated in the MG3670B/C), 5 to 2750 MHz (incorporated in the MG3671A/B and MG3672A)

WCPE

Bit rate: 1152 kbps
Baseband filter: Root Nyquist (

α = 0.5), Nyquist (α = 0.5)

Continued on next page