Atec Agilent-E4418B-E4419B - Manual (Page 8)

E4418B/9B EPM Series power meter performance characteristics
(continued)
8
The following information describes
characteristic performance based at
a temperature of 25 °C unless otherwise
noted.
General conditions: Complies with
the requirements of the EMC Directive
89/336/EEC. This includes Generic
Immunity Standard EN 50082-1: 1992 and
Radiated Interference Standard EN
55011: 1991/CISPR11:1990, Group 1 -
Class A. Interface: GBIB interface operates
to IEEE 488.2. RS-232 and RS-422
serial interface supplied as standard.
Command language: SCPI standard
interface commands. 436A and 437B
code compatible (E4418B only); 438A
code compatible (E4419B only).
GPIB compatibility: SH1, AH1, T6, TE0,
L4, LE0, SR1, RL1, PP1, DC1, DT1, C0.
Battery: Lithium polycarbon
monoflouride, approximate lifetime 5
years at 25 °C
Operating environment
Temperature: 0°C to 55 °C
Maximum humidity: 95% at 40 °C
(non-condensing).
Minimum humidity: 15% at 40 °C
(non-condensing).
Maximum altitude: 3000 meters
(9840 feet).
Storage conditions
Storage temperature:
–20 °C to +70 °C.
Non-operating maximum humidity:
90% at 65 °C (non-condensing).
Non-operating maximum altitude:
15240 meters (50,000 feet).
Safety
Conforms to the following product
specifications:
EN61010-1: 1993/IEC 1010-1: 1990
+A1/CSA C22.2 No. 1010-1: 1993
EN60825-1: 1994/IEC 825-1: 1993
Class 1 Low Voltage Directive
72/23/EEC
Typical operating time: up to 3.5
hours with LED backlight on; up to
5.5 hours with LED backlight off
(E4418B power meter).
Charge time: 2 hours to charge fully
from an empty state; 50 minutes
charging enables 1 hour of operation
with LED backlight on; 35 minutes
charging enables 1-hr operation with
LED backlight off. Power meter is
operational whilst charging.
Service life (to 70% of initial capacity at
25 °C): 450 charge/discharge cycles
Chemistry: Nickel metal hydride
Weight: 1 kg
Battery Option 001 operational
characteristics
1
Environmental characteristics Remote programming
1. Characteristics describe product performance that is useful in the application of the product, but is not covered by the product warranty.