Atec Agilent-5000 Series - Manual (Page 7)

7
RS-232/UART serial decode and
trigger (N5457A or Option 232 on
new scope purchases)
The application lets you easily view
the information sent over a RS-232 or
other UART serial bus. Display real-
time time‑aligned decode of transmit
and receive lines. The application also
enables triggering on RS-232/UART
conditions.
Figure 9. Trigger on and decode
RS-232/UART transmission
Segmented memory (N5454A
or Option SGM on new scope
purchases)
Segmented memory optimizes
available memory for data streams
that have long dead times between
activity. The application is most
useful for analyzing signal activity
associated with laser pulses, serial
buses, and bursty signals such as
radar. View an overlay of all signal
segments, including serial decode,
while highlighting the current segment.
Quickly move between segments to
view signal detail associated with a
specific segment.
For more information:
www.agilent.com/find/segmented
This application requires a 4-channel
DSO and can use any combination
of the scope or logic acquisition
channels.
For more information:
www.agilent.com/find/RS-232
Figure 10. Use segmented memory to
optimize available memory
Software options
(continued)
Figure 11. Time-correlated display of
the FlexRay physical layer signal with
protocol decoding.
FlexRay Measurements (N5432C or
Option FLX on new scope purchases)
Trigger on and time‑correlate FlexRay
communication with physical layer
signals. With Agilent’s unique hard‑
ware-accelerated decoding, it provides
the fastest decode update rates in
the industry while the scope remains
responsive and fast. Also included
with this option is FlexRay eye‑diagram
mask testing and physical layer con‑
formance test solution.
This application requires a 4-channel
DSO.
For more information:
www.agilent/find/flexray
Figure 12. Time-correlated display of the
MIL-STD 1553 physical layer signal with
protocol decoding.
MIL-STD 1553 Serial Trigger and
Decode (N5469A or Option 533 on new
scope purchase)
This application provides integrated
MIL-STD 1553 serial bus trigger‑
ing, hardware‑based decoding, and
eye-diagram mask testing to help you
debug and characterize the
electrical/physical layer of
MIL-STD 1553 serial buses faster
than with traditional “bit-counting”
methods.
This application requires a 4-channel
DSO.
For more information:
www.agilent.com/find/1553