Atec Agilent-54855A - Manual (Page 9)

9
www.agilent.com/find/infiniimax
InfiniiMax is the world’s best high-speed probe
• InfiniiMax’s bandwidth is greater than the
scope’s bandwidth.
• Each use model (browsing, solder-in, socket) is
optimized for maximum performance.
• Supports both differential and single-ended
measurements with a single probe amplifier.
InfiniiMax probes have fully characterized
performance for all of their various probe heads.
This includes:
• Swept frequency response plot
• Common mode rejection vs. frequency plot
• Impedance vs. frequency plot
• Time-domain probe loading plot
• Time-domain probe tracking plot
See page 16 for an example.
One-year standard warranty on active probes and
a variety of Agilent support options to choose from.
Controlled impedance transmission lines in every
probe head deliver full performance versus the
performance limitations produced by traditional
wire accessories.
Probe interface software allows you to save the
calibration information for up to 10 different probe
heads per channel and will automatically retrieve
calibration data for a probe amplifier as it is
attached to the scope.
Supplied axial lead resistors, when trimmed to the
appropriate length, allow user to trade off bandwidth
and reach. Values and trimming templates are supplied
for measurements from 2.8 GHz to 7 GHz.
The damped-wire accessory provides maximum
connection reach and flexibility without introducing an
in-band resonance for signals up to 1.2 GHz bandwidth.
High-input impedance active probes minimize
loading, support differential measurements and DC
offset, and can compensate for cable loss.