Atec Agilent-54855A - Manual (Page 18)

18
Ordering Information
(continued)
54850 Series Infiniium oscilloscope options and accessories
Accessories Description
E2681A EZJIT jitter analysis software for Infiniium 5485xA oscilloscopes
E2654A EZ Probe Positioner ® : includes base, joystick, and articulating arm
E2680A After-purchase memory upgrade for Infiniium 5485xA oscilloscopes
Order 5485xA option 001 when purchasing a new Infiniium 5485xA oscilloscope. The E2680A
is for customers who own a 5485xA scope and wish to upgrade the acquisition memory.
1184A Testmobile with keyboard and mouse tray, drawer for accessories
E5850A Time-correlation fixture – integrate Infiniium scope and 1670x logic analyzer
E2655A Additional probe deskew/performance verification kit for InfiniiMax probes
54855-67604 18 GHz BNC-compatible to APC 3.5 (f) adapter for Infiniium 5485xA scopes
Foot Switch Kinesis Savant 3-Action Programmable Foot Switch P/N AC004PF
Allows you to easily program the 3-action foot pedals to perform the following
scope functions: run, stop, toggle between run and stop, save waveform, save
screenshot, measure any five waveform parameters and recall an instrument setup.
See http://www.kinesis-ergo.com/prog_fs.htm for additional information and
ordering instructions.
1130 Series InfiniiMax probing system
Probe amplifiers model Description
1134A 7 GHz InfiniiMax probe amp – order one or both E266xA connectivity kits per amp
1132A 5 GHz InfiniiMax probe amp – order one or both E266xA connectivity kits per amp
1131A 3.5 GHz InfiniiMax probe amp – order one or both E266xA connectivity kits per amp
Connectivity kits model Description
E2669A InfiniiMax connectivity kit for differential measurements
E2668A InfiniiMax connectivity kit for single-ended measurements
Additional components Description
E2675A InfiniiMax differential browser probe head and accessories. Includes 20 replaceable
tips and ergonomic handle. Order E2658A for replacement accessories.
E2676A InfiniiMax single-ended browser probe head and accessories. Includes 2 ground collar
assemblies, 10 replaceable tips, a ground lead socket and ergonomic browser handle.
Order E2663A for replacement accessories.
E2677A InfiniiMax differential solder-in probe head and accessories. Includes 20 full bandwidth
and 10 medium bandwidth damping resistors. Order E2670A for replacement accessories.
E2678A InfiniiMax single-ended/differential socketed probe head and accessories. Includes 48 full
bandwidth damping resistors, 6 damped wire accessories, 4 square pin sockets and
socket heatshrink. Order E2671A for replacement accessories.
E2679A InfiniiMax single-ended solder-in probe head and accessories. Includes 16 full bandwidth
and 8 medium bandwidth damping resistors and 24 zero ohm ground resistors. Order E2672A
for replacement accessories.