Atec Agilent-54855A - Manual (Page 8)

8
InfiniiMax: The Worlds Best High-Speed Probing System
InfiniiMax offers you the highest performance
available for measuring differential and
single-ended signals, with flexible connectivity
solutions for today’s high-density ICs and
circuit boards.
Variable spacing via the tab on the side of the
differential browser allows the probe tips to be
adjusted for different circuit geometries from
0.25-5.80 mm (10-230 mills).
Z-axis compliance allows both probe tips of the
differential browser to spring, supporting various
probing angles and target system characteristics.
Differential browser is the best choice for
general-purpose trouble-shooting of differential or
single-ended signals up to 6 GHz bandwidth.
Solder-in differential probe head provides 7 GHz
bandwidth and can be attached to very small
geometry circuits for measuring both single-ended
and differential signals.
The differential socket probe head can be used to
measure either differential or single-ended signals
to 7 GHz bandwidth.
Extremely small single-ended, solder-in probe
heads support 5.2 GHz measurements of even the
hardest-to-reach single-ended signals.
Single-ended browser is the best choice for
general purpose probing of single-ended signals
when small size of the probe head is the primary
consideration. Bandwidths up to 5.5 GHz can be
obtained in this configuration.
The 54006A 7.5 GHz resistive divider probe is
available as a low-cost probing alternative for
casual inspection of signals.
A flat frequency response over the entire probe
bandwidth eliminates the distortion and
frequency-dependent loading effects that are
present in probes that have an in-band resonance.
Ergonomic sleeves make hand browsing
comfortable even over long periods of time.