Atec EMCP-MIG2000-6 - Manual (Page 9)

TECHNICAL SPECIFICATION E-MIG2000-6
4.4 Ringwave MIL-STD-1275
Voltage range output generator 100 V up to 1000 V open circuit
Rise time 10/90% < 50 ns open circuit
Oscillation frequency between 100 to 500 kHz open circuit
Energy at 550 V 15 mJ
Energy at 250 V 3 mJ
Pulse repetition 2 to 0.001Hz
Power supply d.c.
Voltage maximum 28V
Maximum current 30A
Power supply a.c.
Voltage 115V
Maximum current 25A
Voltage 230V
Maximum current 10A
Frequency 50/60/400Hz
4.5 Airbus AMD24-C
Serial Injection
Voltage range BT4 output 50 – 1200V Calibration loop 1 or 2 turns
Inductance secondary Approx. 190 µH 2 turns
Maximum EUT power supply
current at Maximum voltage drop at the
CN-MIG-BT4 < 15V
400Hz 30A
600Hz 20A
800Hz 15A
Voltage drop at maximum
current < 15V
Waveform 2/10 us
Source impedance with BT4 50 Ohms +/- 10 %
Decoupling for serial injection up to 250V at 50/60 Hz
up to 115V at 800 Hz
Repetition up to max 2 Hz
10 s(to charge the C-battery) Interval between tests
Waveform 2/50 us
Source impedance with BT4 5 Ohms +/- 10 %
Decoupling for serial injection up to 250V at 50/60 Hz
up to 115V at 800 Hz
Repetition up to max 2 Hz
10 s(to charge the C-battery) Interval between tests
Waveform 2/100 us
Source impedance with BT4 5 Ohms +/- 10 %
Decoupling for serial injection up to 250V at 50/60 Hz
up to 115V at 800 Hz
Repetition up to max 1 Hz
10 s(to charge the C-battery) Interval between tests
Output polarity Positive./negative
0 7 . 0 5 . 2 0 0 9 E M C P A R T N E R A G 9 / 1 4